ASSEMBLY
PARTS IDENTIFICATION
COVER
UPPER CHUTE
FULL
BAGGER
INDICATOR
CHUTELATCH
%,
GRASS |
|
| \ |
|
CATCHER |
|
|
| |
CONTAINERS |
|
|
| |
LOWER | CHUTE | _ "_'_ | LOWER | CHU'_ E |
|
|
| ATTACHING |
STRAPS
NOTE: When right hand (R H.) and left hand (L.H.) are mentioned in this man ua, t means when you are seated on the tractor, in the operator's position_
THESE ARE THE TOOLS YOU WILL NEED TO ASSEMBLE YOUR GRASS CATCHER:
(1) | 3/8" Wrench | (1) | Drive Ratchet | |
(1) | 1/2" | Wrench | (1) | 3" or longer Extension |
(2) | 9/16" Wrenches | (1) | Short Handle | |
(1) | 1/2" | Socket |
| Phillips Screwdriver' |
|
|
|
|
(1) 9/16" Deep well Socket
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•Depress clutch/brake pedal fully and set parking brake.
•Place gearshift/motion control lever in "NEUTRAL" position.
°Place attachment clutch in "DISENGAGED" position,
•Turn ignition key "OFF" and remove key.
•Make sure the blade and all moving parts have completely stopped,
•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug,
6