ASSEMBLY
CHUTE LATCH ASSEMBLY
(See Fig. 10)
Use Hardware - - GROUP "E & F"
oAssemble latch pin to upper chute, as shown.
eAssemble rubber latch to lower chute, as shown.. Tighten all hardware securely.
UPPER CHUTE (See Fig. 11 &12)
No hardware required
•Lower mower deck to its lowest cutting position
,Assemble upper chute by inserting curved end into hole in back of cover,
NOTE: Handle carefully so as not to damage full bagger indicator_
#10 x
UPPER CHUTE
#10 x 5/8"
SCREW
WASHERS
3/16 x 3/4 x 16 Ca.
SPLIT
SPACER
I/ACORN NUT
RUBBER
LATCH
•Push in and turn upper chute until it is in line with lower chute.
aAlign the bosses on lower chute with alignment slots on upper chute and slide together.
oSecure with rubber latch by hooking hole in latch over
latch pin.
FULL BAGGER
UPPER INDICATORHANDLE
WELD
WASHER /
3/16x3/4x16 Ca.
LOCK WASHER
Fig. 10
o_J
Fig. 11
ALIGNMENT
SLOT
LATCH PIN
Fig. 12
LEVEL MOWER DECK
No hardware required
. Be sure deck is properly leveled for best mower perfor- mance See your tractors owner's manual for instruc- tions
10