Porter-Cable PCH3200, A09608-0412-0 instruction manual Starting, Shutting Down

Page 13

STARTING

Prior to starting, refer to your engine manual for proper starting procedure.

1.In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to Engine Owners Manual for correct procedure.

2.Check engine oil level. See Engine Owners Manual for correct procedure. NOTE: There will

be a slight amount of oil in the engine from factory testing.

8.

Start engine. See Engine

 

Owners Manual for correct

 

procedure. NOTE: When engine

 

rope is pulled, pressure starts

 

building in the gun. If the engine

 

does not start after two pulls,

 

pull the gun trigger to relieve this

 

pressure.

9.

Depress trigger on gun to

 

start water flow. NOTE: Stand

 

on a stable surface and grip

 

gun/spray wand firmly with both

 

hands. Expect the gun to kick

 

when triggered.

10.

Release trigger to stop water

 

flow.

11.

Adjust spray for the task being

3.Verify the filter screen is in water inlet of pump. NOTE: Cone side faces out.

Filter Screen

performed by changing quick

connect nozzle. See How To Use

Spray Wand instructions in this

section.

SHUTTING DOWN

1. After each use, if you have

applied chemicals, place chemical

4.Connect water source to pump inlet. NOTE: Water source must provide a minimum of 5 gallons per minute at 20 PSI.

5.Connect high pressure hose to pump outlet.

High Pressure Hose

Water

Source

6.If applying a chemical or cleaning solution, see How To Apply Chemicals/Cleaning Solvents instructions in this section.

7.Turn water source on. NOTE: Failure to do so could cause damage to the pump.

 

hose into container of clean water

 

and draw clean water through

 

chemical injection system to rinse

 

system thoroughly. NOTE: Failure

 

to do so could cause damage to

 

the pump.

2.

Turn engine off. See Engine

 

Owner’s Manual. NOTE: NEVER

 

turn the water off with the engine

 

running.

3.

Turn water source off.

4.

Pull trigger on spray gun to

 

relieve any water pressure in

 

hose or spray gun.

5.

See Storage section in this

 

manual for proper storage

 

procedures.

13- ENG

A09608

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Horsepower 3200 PSI Consumer Safety Information Safety Guidelines DefinitionsRisk of Explosion or Fire Risk to Breathing Risk of Explosion or FireRisk to Fluid Injection Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationAssembly Instructions Carton ContentsDo not operate this hose reel until Assembly hose reelHose end with swivel A09608 ENG Basic Elements of a Pressure Washer Operating InstructionsChoke Control Opens and closes carburetor choke valve Pressure Washer Terminology Pressure AdjustmentsPressure reg Ulator onRead and Understand ALL Warnings Before Starting Unit HOW to USE Spray WandTo Apply chemicals HOW to Apply Chemicals and Cleaning SolventsShutting Down StartingHow To Change Pump Oil MaintenancePump EngineHOW to Clean the Water Inlet Filter Nozzle CleaningHOW to Remove the Wheels Remove filter Filter Screen by graspingEngine Pump StoragePressure Washer Causecorrection ProblemProblem Cause Correction ENG A09608 Limited Warranty

PCH3200, A09608-0412-0 specifications

The Porter-Cable PCH3200 is a versatile and powerful air compressor designed for a range of DIY projects and professional applications. With its robust construction and user-friendly features, it stands out as a reliable choice for both novice and experienced users.

One of the primary features of the PCH3200 is its 3.2-gallon tank capacity. This tank size provides a good balance between portability and adequate air supply for various tools, such as nailers, staplers, and inflation devices. The compressor operates with a maximum pressure of 125 PSI, ensuring that users can achieve the necessary power to complete demanding tasks efficiently.

The PCH3200 is equipped with a 1.5-horsepower motor, allowing it to deliver quick recovery times and sustained performance. This capability is particularly beneficial for continuous use of pneumatic tools, ensuring that there’s little downtime between tasks. Additionally, the motor is designed for easy starting, even in colder conditions, which is an essential feature for many users working in varied environments.

Another notable technology featured in the Porter-Cable PCH3200 is its oil-free pump design. This eliminates the need for regular maintenance associated with oil changes, making the compressor easy to operate and maintain. The oil-free design also contributes to cleaner airflow, making it an excellent option for users who prioritize air quality when working with sensitive materials.

Portability is further enhanced by its compact design and lightweight frame. The built-in carrying handle allows for easy transportation, whether you are moving it around the workshop or taking it to a job site. Its low profile and small footprint mean it can be stored conveniently without taking up significant space.

The PCH3200 also includes a user-friendly control panel that makes it simple to adjust the pressure settings according to specific job requirements. Safety features such as a thermal overload protector help prevent motor damage from overheating, adding peace of mind during operation.

Overall, the Porter-Cable PCH3200 stands out in its category for its efficiency, ease of use, and robust performance. Whether for home improvement projects or professional applications, it offers a blend of features and technologies that cater to the needs of a wide range of users.
Top Page Image Contents