Porter-Cable PCH3200, A09608-0412-0 instruction manual Problem, Causecorrection

Page 17

PROBLEM

TROUBLE SHOOTING GUIDE

CAUSECORRECTION

Engine will not start (see Engine Manual for further engine troubleshooting)

No or low pressure (initial use)

No fuel.

Low oil

Pressure builds up after two pulls on the recoil starter or after initial use.

Choke lever in the "No Choke" position.

Spark plug wire not attached.

Engine ON/OFF switch in OFF position.

Choke lever in the "Choke" position on a "hot" engine or an engine that has been exposed to thermal heat for a long period of time.

Fuel valve closed

Spray wand not in high pressure.

Low water supply.

Leak at high pressure hose fitting.

Nozzle obstructed.

Water filter screen clogged.

Defective E-Z start valve.

Air in hose.

Choke lever in the "Choke" position.

High pressure hose is too long.

Add Fuel.

Add required amount of oil.

Squeeze gun trigger to relieve pressure.

Move choke to the "Choke" position.

Attach spark plug wire.

Place engine ON/OFF switch in ON position.

Move choke to the "No Choke" position.

Move the fuel valve lever to the "Open" position.

See How to Use Spray Wand instructions in the Operation Section.

Water supply must be at least 5 GPM @ 20 PSI.

Repair leak. Apply sealant tape if necessary.

See Nozzle Cleaning instructions in the Maintenance section.

Remove and clean filter.

Check with Authorized Warranty Service Center (AWSC.)

Turn off the engine, then the water source. Disconnect the water source from the pump inlet and turn the water source on

to remove all air from the hose. When there is a steady stream of water present, turn water source off. Re-connect water source to pump inlet and turn on water source. Squeeze trigger to remove remaining air

Move choke to the "No Choke" position.

Use high pressure hose under 100 feet.

17- ENG

A09608

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Horsepower 3200 PSI Risk of Explosion or Fire Safety Guidelines DefinitionsConsumer Safety Information Risk to Fluid Injection Risk of Explosion or FireRisk to Breathing Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationAssembly Instructions Carton ContentsHose end with swivel Assembly hose reelDo not operate this hose reel until A09608 ENG Choke Control Opens and closes carburetor choke valve Operating InstructionsBasic Elements of a Pressure Washer Pressure Washer Terminology Pressure AdjustmentsPressure reg Ulator onRead and Understand ALL Warnings Before Starting Unit HOW to USE Spray WandTo Apply chemicals HOW to Apply Chemicals and Cleaning SolventsShutting Down StartingHow To Change Pump Oil MaintenancePump EngineHOW to Clean the Water Inlet Filter Nozzle CleaningHOW to Remove the Wheels Remove filter Filter Screen by graspingPressure Washer StorageEngine Pump Causecorrection ProblemProblem Cause Correction ENG A09608 Limited Warranty

PCH3200, A09608-0412-0 specifications

The Porter-Cable PCH3200 is a versatile and powerful air compressor designed for a range of DIY projects and professional applications. With its robust construction and user-friendly features, it stands out as a reliable choice for both novice and experienced users.

One of the primary features of the PCH3200 is its 3.2-gallon tank capacity. This tank size provides a good balance between portability and adequate air supply for various tools, such as nailers, staplers, and inflation devices. The compressor operates with a maximum pressure of 125 PSI, ensuring that users can achieve the necessary power to complete demanding tasks efficiently.

The PCH3200 is equipped with a 1.5-horsepower motor, allowing it to deliver quick recovery times and sustained performance. This capability is particularly beneficial for continuous use of pneumatic tools, ensuring that there’s little downtime between tasks. Additionally, the motor is designed for easy starting, even in colder conditions, which is an essential feature for many users working in varied environments.

Another notable technology featured in the Porter-Cable PCH3200 is its oil-free pump design. This eliminates the need for regular maintenance associated with oil changes, making the compressor easy to operate and maintain. The oil-free design also contributes to cleaner airflow, making it an excellent option for users who prioritize air quality when working with sensitive materials.

Portability is further enhanced by its compact design and lightweight frame. The built-in carrying handle allows for easy transportation, whether you are moving it around the workshop or taking it to a job site. Its low profile and small footprint mean it can be stored conveniently without taking up significant space.

The PCH3200 also includes a user-friendly control panel that makes it simple to adjust the pressure settings according to specific job requirements. Safety features such as a thermal overload protector help prevent motor damage from overheating, adding peace of mind during operation.

Overall, the Porter-Cable PCH3200 stands out in its category for its efficiency, ease of use, and robust performance. Whether for home improvement projects or professional applications, it offers a blend of features and technologies that cater to the needs of a wide range of users.
Top Page Image Contents