Porter-Cable D21679-008-0 instruction manual Generator Quick Facts

Page 20

Generator Quick Facts

CALL 1-888-559-8550 TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS AND SERVICE PART PURCHASES

ENGINE

Use clean, fresh gasoline with a minimum 87 octane rating. Do not add gasoline

GAS

during or immediately after use.

 

 

ENGINE

Refer to engine owner’s manual for oil recommendations.

 

OIL

Most generators are equipped with a low-oil shutdown. If the oil is low or if the

 

Generator is not level, the engine will not start.

 

 

WATTAGE

Make wattage calculations before use. Refer to general operator’s manual for further

instructions.

 

 

 

WIRING

Contact an electrician for any wiring instructions. If wiring into a house, a double-throw

transfer switch and a heavy duty cord set must be used.

 

 

 

 

Use a standard (12V) lawn and garden battery with a minimum of 45 A.H. or 210 CCA.

 

 

BATTERY

The voltage and frequency are regulated by the rpm’s of the engine. Do not adjust the

throttle or governor to achieve higher performance. This will only alter the factory Pre-

VOLT

set settings and damage anything connected to the generator.

REG.

 

 

 

 

Be sure a volt/amp surge protector is used when sensitive electronic equipment is

 

used, such as: televisions, computers, stereos, and etc… The damage of such

 

equipment without the use of a protector WILL NOT be covered under warranty.

ENGINE

Do not adjust or attempt maintenance without consulting engine manual or an

authorized engine service center.

 

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

STORAGE

When in long term storage, operate the generator every 60 days for at least 10 minutes

with a load on it. This will prevent the loss of residual magnetism that produces the

 

 

electricity.

 

Allow the generator to run 5 minutes at no load for the engine and the genhead to

 

stabilize.

OPERATION

Make sure the adequate size of extension cord is used. Refer to the Grounding

 

Instructions/Extension Cord section of the owners manual.

 

If the generator is operating equipment that is drawing half of the rated watts it is

 

considered 50% load. Using all of the rated watts is considered 100% load.

 

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

 

 

 

Porter-Cable Corporation

 

4825 Highway 45 North

 

P.O. Box 2468

 

Jackson, TN 38302-2468

 

1-888-559-8550

20 — ENG

Page 19 Page 20
Image 20
Page 19 Page 20
Contents Instruction Manual Generator Specification ModelWarranty This Warranty is not Transferable and does not CoverSafety Guidelines Definitions Important Safety InstructionsHazard What could Happen HOW to Prevent IT Risk of Electrocution and FireOperation of generator in rain Wet, icy, or flooded conditionsRisk of Fire Do not Operate UnitDoors or in ANY Confined AreaRisk of Breathing Inhalation Hazard Generator Risk of Unsafe OperationListed voltage surge protec Risk from Lifting Risk of HOT SurfacesRisk of Moving Parts Assembly Extension Cord Wire Gauge Chart LengthRemove Generator from Carton Grounding the GeneratorOperation Stopping Engine Connecting Electrical LoadsTo Start the Engine Maintenance StorageWattage Calculations Running Watts Starting WattsStarting Wattage Requirements Volts X Amp = Watts Volts x 10 amps = 1200 wattsHousehold Wattage Calculator Appliance or Load Device Typical Device Wattage TotalTroubleshooting Guide Problem Cause CorrectionENG ENG Generator Quick Facts

D21679-008-0 specifications

The Porter-Cable D21679-008-0 is an exceptional tool designed for professionals and DIY enthusiasts seeking reliability and efficiency in their projects. Known for its robust performance and innovative features, this tool has become a staple in various industries, particularly in woodworking and construction.

One of the main features of the D21679-008-0 is its powerful motor, delivering consistent performance that enhances productivity. The motor is designed for heavy-duty applications and can handle a variety of tasks with ease. Coupled with a well-designed gear system, the tool ensures smooth operation and longevity, making it a smart investment for any toolkit.

Another key feature is its lightweight and ergonomic design. The D21679-008-0 is engineered for comfort during prolonged use. Its balanced weight distribution minimizes user fatigue, allowing for extended periods of operation without discomfort. The soft-grip handle provides additional control, giving users a confident grip even in challenging working conditions.

The D21679-008-0 incorporates advanced technology that elevates its performance. It features precision-engineered components that optimize cutting efficiency, ensuring clean and accurate results. Additionally, the tool is equipped with a variable speed control function, allowing the user to adjust the speed according to the material and application. This versatility makes it suitable for cutting through different materials, from softwoods to harder composites.

Safety is also a significant consideration in the design of the D21679-008-0. It includes several safety features such as a protective blade guard that minimizes the risk of accidental contact while in use. This thoughtful incorporation of safety measures reflects Porter-Cable’s commitment to user protection and functionality.

Durability is another characteristic that sets the D21679-008-0 apart. The tool is constructed from high-quality materials that withstand the rigors of daily use. This robust construction not only prolongs the tool's lifespan but also contributes to its reliability in various working environments.

In summary, the Porter-Cable D21679-008-0 stands out due to its powerful motor, ergonomic design, advanced technology, emphasis on safety, and durable construction. These features make it an essential tool for anyone looking to enhance their efficiency and precision in woodworking and construction tasks. Whether for professional use or home improvement projects, this tool delivers an outstanding performance that meets the demands of any user.
Top Page Image Contents