Poulan PPB5500P, 952711671, 115261126 instruction manual Chain Replacement, To Replace Chain

Page 12

File Holder

File

4. Check and lower depth gauges.

Depth Gauge Tool

File

Cutter

90˚

Depth Gauge

Depth Gauge

SAlign the 30˚ file holder marks parallel with the bar and to the center of the chain.

Cutter

30˚

Cutter

File Holder Line

 

SSharpen cutters on one side of the chain first. File from the inside of each cutter to the outside. Then, turn the chain saw around and repeat the process for the other side of the chain.

SFile on the forward stroke only. Use 2 or 3 strokes per cutting edge.

SKeep all cutters the same length when filing.

SFile enough to remove any damage to cutting edges (side plate and top plate of cutter).

All Cutters

Remove Damage

Same Length

 

 

Top Plate

 

Side Plate

SFile chain to meet the specifications as shown.

75˚60˚

30˚

Hook Angle

 

0.025 inch

 

(0.65 mm)

 

Rounded

Right

Corner

 

Too Much Hook Angle

Squared Off

 

Corner

SPlace gauge tool on cutter.

SIf the depth gauge is higher than the depth gauge tool, file it level to the top of the depth gauge tool.

SMaintain rounded front corner of depth gauge with a flat file.

NOTE: The very top of the depth

gauge should be flat with the front half rounded off with a flat file.

If you require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723.

CHAIN REPLACEMENT

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

It is normal for a new chain to stretch during the first 15 minutes of operation. You should re- check your chain tension frequently and adjust the chain tension as required. See CHAIN TEN- SION section.

Replace the old chain when it becomes worn or damaged. Use only the Low-Kickback replace- ment chain specified in the repair parts list.

TO REPLACE CHAIN:

1.Move ON/STOP switch to the STOP posi- tion and disconnect spark plug (or discon- nect unit from power source).

2.Remove bar clamp nut.

3.Remove bar clamp.

4.Turn adjusting screw by hand counter- clockwise until adjusting pin just touches the stop.

5.Slide guide bar behind sprocket until guide bar stops against sprocket.

6.Remove the old chain.

7.Carefully remove new chain from pack- age. Hold chain with the drive links as shown.

Cutter

Tip of

Bar

Drivelink

CUTTERS MUST FACE IN

DIRECTION OF ROTATION

Wrong

WARNING: Maintain the proper hook angle according to the manufacturer’s specifica- tions for the chain you are using. Improper hook angle will increase the chance of kickback which can result in serious injury.

Cutters

Depth Gauge

 

Drive Links

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Safety Rules Plan AheadMix and pour fuel outdoors UNIT/MAINTENANCE Safety Operate Your Pruner SafelyKickback Safety Features KickbackReduce the Chance Kickback Maintain ControlAssembly Installing Pruner ATTACH- MentTransporting and Storage Tools RequiredShoulder Strap Assembly Adjusting the Assist HandleOperation Installing Attachment Hanger BAR and Chain LubricationOperating Position Pruning Important PointsMaintenance Inspect and Clean Unit and DecalsCheck for Damaged or Worn Parts Check for Loose Fasteners and PartsService and Adjustments Chain Replacement To Replace ChainChain Adjustment User Replaceable Service PartsSeasonal Storage Limited Warranty Statesville RoadCanada, contact

115261126, 952711671, PPB5500P specifications

The Poulan 952711671, PPB5500P, and 115261126 are powerful tools tailored for outdoor enthusiasts, gardeners, and professionals alike. These products reflect the brand's commitment to quality, performance, and user-friendly features, making them a popular choice in the industry.

The Poulan 952711671 is a replacement part known for its durability and compatibility with various Poulan models. This part is often sought after for maintenance and repair, ensuring that equipment continues to perform at its best. The high-quality construction helps to prolong the life of the equipment, reducing downtime and enhancing overall efficiency. It is engineered with precision to fit seamlessly into existing systems, making installation straightforward for users.

The PPB5500P, a robust gas-powered blower, stands out due to its impressive airspeed and volume capabilities. This blower features a powerful 50cc engine, providing the necessary power to tackle heavy-duty tasks such as clearing leaves, debris, and grass clippings. The product is designed with user comfort in mind; it includes an ergonomic handle that reduces strain during extended use. Additionally, the lightweight construction allows for easy maneuverability, enabling users to work efficiently without fatigue.

One of the standout technologies found in the PPB5500P is the professional-grade air filtration system, which ensures optimal engine performance and longevity. This feature prevents dirt and debris from entering the engine, which can lead to wear and tear over time. Furthermore, the blower comes with adjustable speed settings, allowing users to customize the airflow according to the task at hand.

The 115261126, another vital component from Poulan, serves as a critical replacement part designed to keep your equipment running smoothly. It embodies the same commitment to quality and reliability that characterize all Poulan products. Utilizing advanced materials and manufacturing processes, the 115261126 ensures endurance even in demanding conditions. The integration of eco-friendly technologies into Poulan's designs demonstrates the brand's commitment to sustainability, appealing to environmentally conscious consumers.

Overall, the combination of the Puolan 952711671, PPB5500P, and 115261126 showcases the brand's dedication to delivering superior products that meet the needs of various users. Whether it's in ensuring equipment longevity or providing powerful performance for outdoor tasks, Poulan continues to be a trusted name in the world of outdoor power tools.
Top Page Image Contents