Poulan 952711671, PPB5500P, 115261126 Shoulder Strap Assembly, Adjusting the Assist Handle

Page 7

6.Before using the unit, tighten both knobs securely by turning clockwise.

WARNING: Make sure the locking/ release button is locked in the primary hole of both couplers and the knobs are securely tightened before operating the unit. Using the wrong holes could lead to serious injury or dam- age to the unit.

Locking/Release

Button in Primary Hole

SHOULDER STRAP ASSEMBLY

WARNING: Proper shoulder strap and handle adjustments are required before use. The shoulder strap clamp must be installed as shown above the assist handle on the engine end shaft.

NOTE: The lower shoulder strap clamp has two spacer tabs attached. These tabs are provided to adapt this attachment for use with units that have a 1 inch (2,5 cm) diameter shaft (the shoulder strap clamp will not tighten down securely on the 1 inch (2,5 cm) diameter shaft without using these spacer tabs). The tabs must be broken off completely before use and placed over the screw holes on the lower shoulder strap clamp. These tabs are not needed for units with a 7/8″ (2,2 cm) shaft.

LOWER SHOULDER STRAP CLAMP

Spacer Tabs

Spacer Tabs positioned for use on 1 inch (2,5 cm) diameter shaft

1.Place the upper shoulder strap clamp over the shaft above the assist handle.

2.Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw holes (use spacer tabs between upper and lower clamps if necessary to secure clamp, i.e. for 1 inch (2,5 cm) diameter shaft).

Upper Shoulder

Strap Clamp

ENGINE/MOTOR

END

Lower Shoulder

ATTACHMENT

END

Strap Clamp

Screws

 

3.Insert two screws into the screw holes.

4.Secure shoulder strap clamp by tighten- ing screws with the hex wrench.

5.Try on shoulder strap and adjust for fit and balance before starting the engine or begin- ning a cutting operation.

6.Insert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign

is on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoul- der strap to allow the strap to rest flat on the shoulder.

7.Adjust the strap, allowing the hook to be about 3 -- 6 inches (8 -- 15 cm) below the waist.

8.Fasten the strap hook to the upper clamp and lift the tool to the operating position.

Shoulder Strap

Shoulder

Strap

Clamp

ADJUSTING THE ASSIST HANDLE

WARNING: When adjusting the as- sist handle, be sure it remains directly above the coupler on the engine end shaft to ensure proper balancing of unit.

Assist Handle

Coupler

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Plan Ahead Safety RulesMix and pour fuel outdoors Operate Your Pruner Safely UNIT/MAINTENANCE SafetyMaintain Control Kickback Safety FeaturesKickback Reduce the Chance KickbackTools Required AssemblyInstalling Pruner ATTACH- Ment Transporting and StorageAdjusting the Assist Handle Shoulder Strap AssemblyOperation Pruning Important Points Installing Attachment HangerBAR and Chain Lubrication Operating PositionCheck for Loose Fasteners and Parts MaintenanceInspect and Clean Unit and Decals Check for Damaged or Worn PartsService and Adjustments To Replace Chain Chain ReplacementUser Replaceable Service Parts Chain AdjustmentSeasonal Storage Statesville Road Limited WarrantyCanada, contact

115261126, 952711671, PPB5500P specifications

The Poulan 952711671, PPB5500P, and 115261126 are powerful tools tailored for outdoor enthusiasts, gardeners, and professionals alike. These products reflect the brand's commitment to quality, performance, and user-friendly features, making them a popular choice in the industry.

The Poulan 952711671 is a replacement part known for its durability and compatibility with various Poulan models. This part is often sought after for maintenance and repair, ensuring that equipment continues to perform at its best. The high-quality construction helps to prolong the life of the equipment, reducing downtime and enhancing overall efficiency. It is engineered with precision to fit seamlessly into existing systems, making installation straightforward for users.

The PPB5500P, a robust gas-powered blower, stands out due to its impressive airspeed and volume capabilities. This blower features a powerful 50cc engine, providing the necessary power to tackle heavy-duty tasks such as clearing leaves, debris, and grass clippings. The product is designed with user comfort in mind; it includes an ergonomic handle that reduces strain during extended use. Additionally, the lightweight construction allows for easy maneuverability, enabling users to work efficiently without fatigue.

One of the standout technologies found in the PPB5500P is the professional-grade air filtration system, which ensures optimal engine performance and longevity. This feature prevents dirt and debris from entering the engine, which can lead to wear and tear over time. Furthermore, the blower comes with adjustable speed settings, allowing users to customize the airflow according to the task at hand.

The 115261126, another vital component from Poulan, serves as a critical replacement part designed to keep your equipment running smoothly. It embodies the same commitment to quality and reliability that characterize all Poulan products. Utilizing advanced materials and manufacturing processes, the 115261126 ensures endurance even in demanding conditions. The integration of eco-friendly technologies into Poulan's designs demonstrates the brand's commitment to sustainability, appealing to environmentally conscious consumers.

Overall, the combination of the Puolan 952711671, PPB5500P, and 115261126 showcases the brand's dedication to delivering superior products that meet the needs of various users. Whether it's in ensuring equipment longevity or providing powerful performance for outdoor tasks, Poulan continues to be a trusted name in the world of outdoor power tools.
Top Page Image Contents