Poulan WT200 LE Blower Tube Assembly, Vacuum BAG Assembly, Vacuum Tube Assembly

Page 5

ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled and all fasteners are secure. Follow all safety information in the manual and on the unit.

DA standard screwdriver is required for as- sembly.

BLOWER TUBE ASSEMBLY

1.Align the rib on the blower tube with the groove in the blower outlet; slide the tube into place.

NOTE: Knob must be loose enough to allow blower tube to be inserted in blower outlet. Loosen knob by turning counterclockwise.

Blower

Outlet Blower

Tube

Groove Rib

2.Secure the tube by turning the knob clock- wise.

3.To remove the tube, turn the knob counter- clockwise to loosen the tube; remove the tube.

VACUUM BAG ASSEMBLY

1.Open the zipper on the vacuum bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

Elbow

TubeSmall

Opening

Zipper

OpeningRib

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube, and the rib on the elbow tube is on the bottom.

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Remove blower tube from engine.

Rib

Groove

5.Insert the elbow tube into the blower outlet. Make sure elbow tube rib is aligned with the blower outlet groove.

6.Turn knob clockwise to secure elbow tube.

VACUUM TUBE ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury.

1.Align the lower vacuum tube as shown. Push lower vacuum tube into upper vacu- um tube.

Upper Vacuum

Tube

Lower Vacuum Tube

2.Insert the tip of a screwdriver into the latch area of the vacuum inlet.

Latch

Blower

Outlet

Area

 

Latch Area

 

Vacuum

 

Inlet Cover

3.Gently tilt the handle of the screwdriver to- ward the back of the unit to release the latch while pulling up on the vacuum inlet cover with your other hand.

4.Hold the vacuum inlet cover open until up- per vacuum tube is installed.

Vacuum Inlet

Retaining Post

Vacuum

Inlet

Cover

-- 5 --

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Know Your Unit Safety RulesPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableMaintain Your Unit Properly Operate Your Unit SafelyBefore starting engine Store in a dry area out of reach of childrenBlower Tube Assembly AssemblyVacuum BAG Assembly Vacuum Tube AssemblyHook Retaining Post HOW to Convert Unit from Vacuum USE to Blower USEShoulder Strap Adjustment Operation To Stop the Engine Before Starting Engine Fueling EngineBefore Starting the Engine Blower VacuumMaintenance Storage Fuel System Troubleshooting Table Cause RemedyEngine OtherEPA/CALIFORNIA Emission Control Warranty Statement Limited WarrantyMaintenance At all Poulan Service centers

WT200 LE specifications

The Poulan WT200 LE is a remarkable addition to the world of outdoor power equipment, designed specifically for those who seek reliability and efficiency in lawn maintenance. This lightweight yet powerful weed trimmer comes with a host of features that cater to both novice users and seasoned landscapers.

One of the standout characteristics of the WT200 LE is its robust 25cc two-cycle engine. This engine is engineered for optimal performance, delivering the power needed to tackle thick weeds and grass with ease. The engine's lightweight design allows for longer usage without causing fatigue, making it an ideal choice for extended trimming sessions.

Another notable feature is the Easy Start technology, which significantly reduces the effort needed to start the trimmer. With a simple pull of the starter cord, users can quickly get to work, eliminating the frustration often associated with starting gas-powered tools. This feature is particularly beneficial for those who may not have the physical strength to start heavier equipment.

The WT200 LE boasts a 17-inch cutting swath, allowing for efficient trimming over larger areas in less time. The dual-line cutting system not only enhances cutting performance but also provides a clean and precise finish. Users can easily replace the trimmer line thanks to the bump head design, which simplifies the process and ensures minimal downtime during operation.

For user comfort, the Poulan WT200 LE is designed with an ergonomic handle that offers a comfortable grip and better control. The adjustable handle ensures that users can achieve a personalized fit, which is especially useful for tackling different terrains and working at various angles.

In terms of safety, this trimmer features a protective guard that shields users from debris, providing an additional layer of security during operation. Moreover, its durable construction ensures that the trimmer can withstand the rigors of outdoor use, making it a dependable tool for years to come.

Overall, the Poulan WT200 LE is a well-rounded weed trimmer that combines power, ease of use, and safety features. Its efficient engine, user-friendly design, and effective cutting capabilities make it an excellent choice for anyone looking to maintain their lawn and garden effortlessly. Whether you’re a homeowner with a small yard or a professional landscaper managing larger properties, the WT200 LE is equipped to meet your trimming needs.
Top Page Image Contents