Before Starting Engine Fueling Engine

S In dusty conditions, slightly dampen sur- faces or use a mister attachment when wa- ter is available.

S Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

SWatch out for children, pets, open windows,

or freshly washed cars. Blow debris away safely.

SUse the full blower nozzle extension so the air stream can work close to the ground.

SAfter using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or boat oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

NOTE: Unit must be placed on its side when adding fuel (see illustration below).

TO STOP THE ENGINE

DTo stop the engine, move the throttle lever to the STOP position.

BEFORE STARTING THE ENGINE

WARNING: You MUST make sure the tubes are secure before using the unit.

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DHold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

STARTING POSITION

Blower

Vacuum

WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area when starting engine or while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through the discharge opening, damaging the unit or property, or causing serious injury to by- standers or the operator.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

-- 8 --

WT200 LE specifications

The Poulan WT200 LE is a remarkable addition to the world of outdoor power equipment, designed specifically for those who seek reliability and efficiency in lawn maintenance. This lightweight yet powerful weed trimmer comes with a host of features that cater to both novice users and seasoned landscapers.

One of the standout characteristics of the WT200 LE is its robust 25cc two-cycle engine. This engine is engineered for optimal performance, delivering the power needed to tackle thick weeds and grass with ease. The engine's lightweight design allows for longer usage without causing fatigue, making it an ideal choice for extended trimming sessions.

Another notable feature is the Easy Start technology, which significantly reduces the effort needed to start the trimmer. With a simple pull of the starter cord, users can quickly get to work, eliminating the frustration often associated with starting gas-powered tools. This feature is particularly beneficial for those who may not have the physical strength to start heavier equipment.

The WT200 LE boasts a 17-inch cutting swath, allowing for efficient trimming over larger areas in less time. The dual-line cutting system not only enhances cutting performance but also provides a clean and precise finish. Users can easily replace the trimmer line thanks to the bump head design, which simplifies the process and ensures minimal downtime during operation.

For user comfort, the Poulan WT200 LE is designed with an ergonomic handle that offers a comfortable grip and better control. The adjustable handle ensures that users can achieve a personalized fit, which is especially useful for tackling different terrains and working at various angles.

In terms of safety, this trimmer features a protective guard that shields users from debris, providing an additional layer of security during operation. Moreover, its durable construction ensures that the trimmer can withstand the rigors of outdoor use, making it a dependable tool for years to come.

Overall, the Poulan WT200 LE is a well-rounded weed trimmer that combines power, ease of use, and safety features. Its efficient engine, user-friendly design, and effective cutting capabilities make it an excellent choice for anyone looking to maintain their lawn and garden effortlessly. Whether you’re a homeowner with a small yard or a professional landscaper managing larger properties, the WT200 LE is equipped to meet your trimming needs.