Poulan 183359 owner manual HOW to USE Your Tractor

Page 11

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal into full “BRAKE” position and hold.

•Place parking brake lever in “ENGAGED” position and release pressure from clutch/brake pedal. Pedal should remain in “BRAKE” position. Make sure parking brake will hold tractor secure.

 

ATTACHMENT CLUTCH

THROTTLE/

LEVER "ENGAGED"

POSITION

CHOKE

 

CONTROL

IGNITION KEY

LEVER

 

"DISENGAGED"

 

POSITION

 

PARKING BRAKE

"BRAKE"

"ENGAGED"

POSITION

POSITION

 

 

GEAR SHIFT

CLUTCH/BRAKE

LEVER

 

PEDAL "DRIVE"

PARKING BRAKE

POSITION

"DISENGAGED"

 

POSITION

FIG. 6

STOPPING (See Fig. 6)

MOWER BLADES -

•To stop mower blades,move attachment clutch lever to “DISENGAGED” position.

GROUND DRIVE -

•To stop ground drive, depress clutch/brake pedal into full “BRAKE” position.

•Move gearshift lever to neutral (N) position.

ENGINE -

•Move throttle control to slow position.

NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to “backfire”.

•Turn ignition key to “OFF” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely, as described above, before leav- ing the operator's position; to empty grass catcher, etc.

TO USE THROTTLE CONTROL (See Fig. 6)

Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower perfor- mance.

TO MOVE FORWARD AND BACKWARD (See Fig. 6)

The direction and speed of movement is controlled by the gearshift lever.

•Start tractor with clutch/brake pedal depressed and gearshift lever in neutral (N) position.

•Move gearshift lever to desired position.

•Slowly release clutch/brake pedal to start movement.

IMPORTANT: BRING TRACTOR TO A COMPLETE STOP BEFORE SHIFTING OR CHANGING GEARS. FAILURE TO DO SO WILL SHORTEN THE USEFUL LIFE OF YOUR TRANSAXLE.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 6)

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approximately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PR1842STC II. Slope Operation IV. ServiceSafe Operation Practices for Ride-On Mowers General OperationSafety Rules Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Check Deck Levelness To SET UP Your Mower for MulchingTo Convert to Bagging or DISCHARG- ING Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor To Transport To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineADD Gasoline Check Engine OIL LevelMulching Mowing Tips Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations Tractor Engine Engine OIL Filter CleaningMuffler Spark PlugsTo Remove Mower See Fig To Install Mower See FigTo Replace Mower Blade Drive Belt See Fig To Level Mower HousingTo Replace Motion Drive Belt See Fig To Adjust Brake See FigTransaxle Gear Shift Lever Neutral Adjustment See Fig Front Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsInterlocks and Relays To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbCylinders OtherFuel System Engine OILTroubleshooting Points OFF Tractor - Model Number PR1842STC SchematicElectrical KEY Part Description Chassis and Enclosures Screw Hex Wshd 8-18 x 7/8 Drive Repair Parts Steering Assembly 180656 Wheel Steering KEY Part NO. NO. Description Seat AssemblyWheels and Tires DecalsEngine 170551 Control Th/ch Flag Mower Deck Repair Parts Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Fold Along This Dotted Line DegreeParts and Service

183359 specifications

The Poulan 183359 is a versatile and efficient chainsaw designed for both homeowners and professionals. Known for its reliability and power, this chainsaw features a robust engine and an array of advanced technologies that make it a top choice for cutting tasks, whether you're trimming branches or tackling larger trees.

One of the main features of the Poulan 183359 is its powerful 38cc two-stroke engine. This engine provides a balance of performance and efficiency, allowing users to cut through tough wood with ease while maintaining fuel economy. The chainsaw is designed to deliver a high power-to-weight ratio, ensuring that it remains lightweight and easy to handle without sacrificing cutting performance.

The Poulan 183359 incorporates an automatic oiling system, which is critical for maintaining the chain's lubrication during operation. This feature not only prolongs the life of the chain but also enhances cutting efficiency by reducing friction. The adjustable flow allows users to customize the oil output depending on the specific task, ensuring optimal performance in various cutting conditions.

Safety is a paramount concern with any power tool, and the Poulan 183359 does not disappoint in this area. It includes a chain brake that can be activated to halt the chain immediately in case of kickback. Additionally, the chainsaw is equipped with a front hand guard, which protects the user's hands from debris and potential injuries while operating.

The design of the Poulan 183359 also emphasizes user comfort. It features an anti-vibration system that minimizes vibrations transferred to the user's hands, reducing fatigue during extended periods of use. Moreover, the ergonomic handle design provides a secure grip, enabling precise control while cutting.

Another notable characteristic is its easy-start technology, which makes starting the engine simpler and more reliable. This feature is particularly beneficial for users who may struggle with traditional starting methods, allowing them to get to work quickly.

With its combination of power, safety features, and user-friendly design, the Poulan 183359 is highly regarded in its category. Whether you are a seasoned professional or a homeowner looking to tackle yard work, this chainsaw delivers performance and reliability, making it an essential tool for any outdoor project. Its well-rounded capabilities make it a dependable choice for those seeking an effective and efficient cutting solution.
Top Page Image Contents