Poulan 194993 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 19

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 14)

Mower will be easier to remove from the right side of tractor.

•Place attachment clutch switch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off electric clutch pulley.

•Disconnect anti-sway bar from chassis bracket by removing retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.

TO INSTALL MOWER (See Fig. 14)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Install belt into electric clutch pulley groove.

ELECTRIC

CLUTCH

PULLEY

SUSPENSION ARMS

RETAINER SPRING

FRONT LINK

RETAINER

SPRINGS

(BOTH SIDES)

ANTI-SWAY BAR

RETAINER

SPRINGS (BOTH SIDES)

DEFLECTOR SHIELD

FIG. 14

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Always Wear EYE Protection During Operation DB18542YTII. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIII. Children ServiceIV. Towing Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Adjust Gauge Wheels See FigTo Operate Mower See Fig Before Starting the Engine Mowing Tips Before Each USE MaintenanceLubrication Chart General RecommendationsCheck Operator Presence System TractorBlade Removal See Fig To Sharpen Blade See FigTransaxle Cooling BatteryEngine BeltsCleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak Battery See FigTo Replace Fuse To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Points Engine dies when Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service

194993 specifications

The Poulan 194993 is a noteworthy string trimmer designed to provide efficiency and durability for both residential and commercial users. Offering a blend of power and innovative features, this trimmer is a great choice for those looking to maintain their lawns and gardens with precision.

One of the defining characteristics of the Poulan 194993 is its powerful engine. It is equipped with a 25cc two-cycle engine, which provides ample power to tackle tough weeds and grass while ensuring a lightweight, easy-to-maneuver design. This combination makes it suitable for various tasks, from trimming delicate flower beds to clearing overgrown areas.

A standout feature of the Poulan 194993 is its Smart Start technology, which allows for easy starting with minimal effort. This technology reduces the resistance in the starter cord by up to 40%, making it possible for users to start the engine quickly and effortlessly, even after extended periods of storage. This feature is particularly helpful for those who may struggle with traditional pull-start trimmers.

The trimmer also boasts a dual-line feed system, which enhances cutting efficiency. The dual-line design allows for a wider cutting path, significantly reducing the time spent on trimming tasks. The semi-automatic feed spool makes it easy to advance the line, ensuring a consistent cutting performance without the need for manual adjustments.

Ergonomically designed, the Poulan 194993 ensures user comfort during operation. It features an adjustable handle that can be customized to suit individual preferences, reducing fatigue during prolonged use. The lightweight construction further complements its ease of handling, making it an ideal choice for long days of yard work.

In addition, this trimmer incorporates a durable construction that withstands the rigors of regular use. The rugged materials used in its design ensure longevity, making it a reliable option for homeowners and professionals alike.

Overall, the Poulan 194993 offers a well-rounded solution for those looking for an effective and user-friendly string trimmer. With its powerful engine, innovative features, and ergonomic design, it stands out as a top choice for maintaining vibrant and well-groomed outdoor spaces. Whether tackling everyday grass trimming or handling more challenging jobs, the Poulan 194993 proves to be a valuable addition to any gardening toolkit.
Top Page Image Contents