Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tractor.
At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual.
• At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.
EACH
USE
BEFORE
Clean Air Filter
Clean Air Screen
Inspect Muffler/Spark Arrester
Replace Oil Filter (If equipped)
Clean Engine Cooling Fins
E
N
G
I
N
E
Change Engine Oil (without oil filter)
Check Operator Presence & ROS Systems
T
R
A Check for Loose Fasteners C Check/Replace Mower Blades T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level
Change Engine Oil (with oil filter)
Check Tire Pressure
Check Brake Operation
MAINTENANCE
SCHEDULE
MAINTENANCE
EVERY | EVERY | EVERY | EVERY | EVERY | BEFORE |
8 | 25 | 50 | 100 | SEASON | STORAGE |
HOURS | HOURS | HOURS | HOURS | | |
3
4
1,2
1,2
2
2
1, 2
2
2
3 - Replace blades more often when mowing in sandy soil. 4 - Not required if equipped with maintenance-free battery.
➀SPINDLE ZERK
➀FRONT WHEEL BEARING ZERK
➀STEERING SECTOR GEAR TETH
➀SPINDLE ZERK
➀FRONT WHEEL BEARING ZERK
➁ENGINE
02956
| BEFORE EACH USE | ➀ General Purpose Grease |
| • Check engine oil level. |
| ➁ Refer to Maintenance “ENGINE” Section |
| • | Check brake operation. |
| |
| • | Check tire pressure. | IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS |
| • Check operator presence and | WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS |
| | ROS systems for proper operation. | LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL |
| | SHORTENTHE LIFE OFTHE SELF-LUBRICATING BEARINGS. |
| • Check for loose fasteners. | IFYOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, |
| | | POWDERED GRAPHITE TYPE LUBRICANT SPARINGLY. |
