Poulan 954569172 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 15)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 15)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

SUSPENSION

ENGINE PULLEY

ARMS

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

(BOTH SIDES)

 

 

 

 

LARGE

 

 

HOUSING GUIDE

RETAINER

 

 

 

SPRING

 

 

 

BRACKET

 

DEFLECTOR SHIELD

 

 

 

FIG. 15

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model NO. PO1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Belts Clean AIR ScreenEngine Transaxle CoolingMuffler CleaningEngine Cooling Fins See Fig Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTo Adjust Brake To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Remove Wheel for Repairs See FigTo Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Remove CABLES, Reverse OrderInterlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO1742STA, Product Number 954 56Electrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered PMST/20 Steering Assembly Nut Hex Jam Toplock 1/2-20 Unf Engine Optional Equipment Spark ArresterEngine 170551 Control Throt /Ch FlagSeat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck Repair Parts Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

954569172, 184210 specifications

The Poulan 184210,954569172 is a robust chainsaw designed for both professional and residential use. It delivers exceptional power and performance, making it a versatile choice for various cutting tasks. With a powerful engine, the chainsaw is capable of tackling jobs ranging from pruning trees to felling larger timber.

One of the main features of the Poulan 184210 is its reliable 42cc engine. This two-stroke engine provides ample power, ensuring smooth operation even under heavy loads. The chainsaw is equipped with a 16-inch guide bar, allowing for precise cuts and easy maneuverability. The inclusion of an automatic oiling system ensures that the chain remains lubricated during operation, helping to extend the lifespan of the chainsaw.

In terms of user-friendly technology, the Poulan 184210 boasts an easy-start mechanism. The innovative Priming System reduces resistance during starting, allowing users to get the chainsaw up and running with minimal effort. Additionally, the chainsaw comes with an anti-vibration system that significantly reduces user fatigue, making it comfortable to use for extended periods.

Safety is a priority with the Poulan 184210, as it features a chain brake that stops the chain in case of kickback, providing peace of mind during operation. The chainsaw also incorporates a throttle lockout, preventing accidental starts and enhancing overall safety.

The design of the Poulan 184210 includes ergonomic handles that offer a secure grip, which improves control and accuracy while cutting. The lightweight construction of the chainsaw further contributes to its ease of use, allowing users to navigate through different cutting scenarios without much strain.

Moreover, the Poulan 184210 is designed for easy maintenance. The tool-free chain tensioning system allows users to adjust the chain easily, ensuring optimal performance without the use of additional tools. This feature is particularly beneficial for users needing quick adjustments on the go.

In summary, the Poulan 184210,954569172 combines power, safety, and user-friendly features, making it an excellent choice for anyone needing a reliable chainsaw for their cutting activities. Its robust performance, advanced technologies, and thoughtful design ensure that it meets the demands of both professional and amateur users alike.
Top Page Image Contents