Poulan 954569172, 184210 To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 20

SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 20

TO CHECK AND ADJUST BRAKE (See Fig. 21)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 21

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model NO. PO1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Clean AIR Screen EngineBelts Transaxle CoolingCleaning Engine Cooling Fins See FigMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO1742STA, Product Number 954 56Electrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered PMST/20 Steering Assembly Nut Hex Jam Toplock 1/2-20 Unf Engine Optional Equipment Spark ArresterEngine 170551 Control Throt /Ch FlagSeat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck Repair Parts Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

954569172, 184210 specifications

The Poulan 184210,954569172 is a robust chainsaw designed for both professional and residential use. It delivers exceptional power and performance, making it a versatile choice for various cutting tasks. With a powerful engine, the chainsaw is capable of tackling jobs ranging from pruning trees to felling larger timber.

One of the main features of the Poulan 184210 is its reliable 42cc engine. This two-stroke engine provides ample power, ensuring smooth operation even under heavy loads. The chainsaw is equipped with a 16-inch guide bar, allowing for precise cuts and easy maneuverability. The inclusion of an automatic oiling system ensures that the chain remains lubricated during operation, helping to extend the lifespan of the chainsaw.

In terms of user-friendly technology, the Poulan 184210 boasts an easy-start mechanism. The innovative Priming System reduces resistance during starting, allowing users to get the chainsaw up and running with minimal effort. Additionally, the chainsaw comes with an anti-vibration system that significantly reduces user fatigue, making it comfortable to use for extended periods.

Safety is a priority with the Poulan 184210, as it features a chain brake that stops the chain in case of kickback, providing peace of mind during operation. The chainsaw also incorporates a throttle lockout, preventing accidental starts and enhancing overall safety.

The design of the Poulan 184210 includes ergonomic handles that offer a secure grip, which improves control and accuracy while cutting. The lightweight construction of the chainsaw further contributes to its ease of use, allowing users to navigate through different cutting scenarios without much strain.

Moreover, the Poulan 184210 is designed for easy maintenance. The tool-free chain tensioning system allows users to adjust the chain easily, ensuring optimal performance without the use of additional tools. This feature is particularly beneficial for users needing quick adjustments on the go.

In summary, the Poulan 184210,954569172 combines power, safety, and user-friendly features, making it an excellent choice for anyone needing a reliable chainsaw for their cutting activities. Its robust performance, advanced technologies, and thoughtful design ensure that it meets the demands of both professional and amateur users alike.
Top Page Image Contents