Poulan 532 43 85-70, 96042012500 Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 6

ASSEMBLY

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Release parking brake by depressing brake pedal.

•Place freewheel control in disengaged position to dis- engage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments sec- tion of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (See “TO TRANSPORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before operat- ing your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Opera- tion section of this manual).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PB22H46YT General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts AssemblyTools Required for Assembly ToremovetractorfromcartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor PH EG CJKStopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control D See FigTo Move Forward and Backward See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To USE Cruise Control J See FigReverse Operation System ROS See Fig Using the Reverse Operation SystemTo Stop Mower Blades To Operate on HillsCheck Engine OIL Level Service REMINDER/HOUR MeterBefore Starting the Engine ADD GasolineMowing Tips Purge TransmissionGeneral Recommendations MaintenanceMaintenance ScheduleBlade Care BatteryTractor Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig To Install Mower See Fig To Remove Mower See FigInstall belt on engine pulley M, in belt keepers G To Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER Service and AdjustmentsTo Start Engine with a Weak Battery See Fig To Remove Wheel See FigTransmission Fuel System StorageOther Engine OILTroubleshooting Engine continues Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXLimited Warranty

96042012500, 532 43 85-70 specifications

The Poulan 532 43 85-70,96042012500 is a powerful and reliable equipment designed for garden maintenance and landscaping tasks. Known for its robust construction and efficient performance, this model caters to both professional landscapers and home gardeners looking for efficiency and ease of use.

One of the key features of the Poulan 532 43 85-70,96042012500 is its powerful engine. Packed with a high-performance motor, it delivers ample power for various tasks, including mowing, trimming, and edging. The engine is designed for fuel efficiency, allowing users to complete their gardening tasks with minimal downtime for refueling. This efficiency makes it an ideal choice for those who have large lawns or gardens that require regular maintenance.

The cutting system is another remarkable aspect of this model. Equipped with a sharp, durable blade, the Poulan ensures a clean and precise cut on grass and vegetation. The adjustable cutting height feature is particularly beneficial for users who desire versatility, allowing them to easily change the blade height to accommodate different types of grass and terrain.

User comfort is also a priority in the design of the Poulan 532 43 85-70,96042012500. The ergonomic grip and lightweight structure enable easy maneuverability, ensuring that operators do not experience fatigue even during extended use. The user-friendly controls ensure that even beginners can operate the equipment without difficulty.

The durability of the Poulan is enhanced by its weather-resistant materials, making it a desirable option for varying climates. Its sturdy frame ensures long-lasting performance, allowing users to rely on this tool for years without needing frequent repairs or replacements.

Additionally, the Poulan 532 43 85-70,96042012500 is designed with safety features to protect users during operation. The blade guard and automatic shut-off mechanisms help prevent accidents, making it a safe option for families and workplaces alike.

Overall, the Poulan 532 43 85-70,96042012500 stands out for its combination of power, efficiency, and user-friendly design. It is an excellent investment for anyone looking to achieve professional-quality results in their lawn maintenance and landscaping endeavors.
Top Page Image Contents