Jensen JMC-326 instruction manual

Page 3

13.Protective Attachment Plug - The appliance is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

14.Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

15.Power Lines - An outdoor antenna should be located away from power lines.

16.Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No.70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure 1.

17.Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

18.Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

19.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A.The power supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

20.Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

2

Image 3
Contents Model JMC-326 Safety Instructions Page On Placement On Protection Against Laser Energy ExposureOn Condensation Main Unit Functions and ControlsLCD Display Remote ControlAC Operation Power SourceActivating the Remote Control Using the Remote Controller CorrectlySetting Alarm and Current Time Operating InstructionsListening to the Radio To Preset Channels To Receive Preset StationsTips for Best Reception CD Operation PLAY/PAUSE ModeSkip and Search Mode Repeat Play ModeProgrammed Play Repeat AllAlarm Operation AUX OperationWake to CD, Radio or Buzzer Snooze Operation Sleep Timer OperationAdjusting the Sleep Time Sleep and Wake to ALARM/CD/RADIOCare and Maintenance Cleaning the UnitCompact Disc Care Symptom Possible Cause Solution Troubleshooting GuideCompliance with FCC Regulations Service