Poulan PB18542LT manual To Adjust Gauge Wheels See Fig, Reverse Operation System ROS

Page 12

OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 6)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a fl at level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

GAUGE

WHEEL

MOUNTING

BRACKET

 

014

 

2

3/8-16

3

 

LOCKNUT

 

3/8 WASHER

SHOULDER

BOLT

 

 

GAUGE WHEEL

FIG. 6

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

•Depress clutch/brake pedal all the way down and hold.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before backing.

•Move gear shift lever to reverse (R) position and slowly release clutch/brake pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE MOWER (See Fig. 7)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER

HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 7

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PB18542LT Always Wear EYE Protection During OperationSafety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation SystemReverse Operation System ROS To Operate Mower See FigBefore Starting the Engine Mowing Tips Maintenance Maintenance ScheduleLubrication Chart General RecommendationsTractor Blade Removal See FigTo Sharpen Blade See Fig Battery EngineBelts Transaxle CoolingCleaning Service and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

PB18542LT specifications

The Poulan PB18542LT, a robust and versatile lawn mower, has gained popularity among homeowners for its effective design and user-friendly features. This powerful machine utilizes a solid 18.5 HP Briggs & Stratton engine, ensuring reliable performance for various grass lengths and terrains. Whether tackling a small yard or a larger property, the PB18542LT's powerful engine makes effortless work of even the toughest lawns.

One of the standout characteristics of the PB18542LT is its 42-inch cutting deck. This larger cutting width allows for more efficient mowing, reducing the time needed to complete yard work. The deck is designed for optimal airflow and grass clipping distribution, ensuring a clean and even cut every time. The machine supports various cutting height adjustments, typically ranging from 1 to 4 inches, allowing users to customize their cut according to their lawn's specific needs and seasonal variations.

Technology-wise, the Poulan PB18542LT features an automatic transmission system, which provides seamless operation and comfortable maneuverability. This feature eliminates the need for constant gear shifting, allowing users to focus more on mowing rather than managing speeds. The steering capability of the mower is enhanced, making it easy to navigate around tight corners and obstacles in the yard.

Durability is another key aspect of the PB18542LT, constructed from high-quality materials that withstand the rigors of regular use. The mower's heavy-duty frame contributes to its stability and longevity, ensuring that it can tackle diverse landscapes without compromising its performance.

Additional conveniences include an easy-to-access fuel tank, a comfortable seat designed for extended operation, and a user-friendly control panel that allows for quick adjustments. The inclusion of a mulching capability allows for efficient grass recycling, reducing the need for bagging and promoting a healthier lawn.

In summary, the Poulan PB18542LT is a feature-rich riding lawn mower designed for durability and efficiency. With its powerful engine, larger cutting deck, and innovative technologies, it combines performance and user comfort effectively. Whether you are a seasoned gardener or a first-time buyer, the PB18542LT stands out as a reliable choice for maintaining your lawn with ease.
Top Page Image Contents