Engine

CUSTOMER RESPONSIBILITIES

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

•Rinse the battery with plain water and dry.

•Clean terminals and battery cable ends with wire brush until bright.

•Coat terminals with grease or petroleum jelly.

•Reinstall battery (See “REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

The transmission fan and cooling fins should be kept clean to assure proper cooling.

Do not attempt to clean fan or transmission while engine is running or while the transmission is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxle.

•Inspect cooling fan to be sure fan blades are intact and clean.

•Inspect cooling fins for dirt, grass clippings and other materials. To prevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling fins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory and fluid mainte- nance is not required for the life of the transaxle. Should the transaxle ever leak or require servicing, contact your nearest authorized service center/department.

LUBRICATION

Only use high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

							SAE 30
			5W-30

F	-20	0			30 32 40		60	80	100
C	-30	-20		-10	0	10	20	30	40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

FIG. 12

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/ dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 12 and 13)

Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove drain plug.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

OIL FILL

CAP/DIPSTICK

OIL DRAIN

PLUG

FIG. 13

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

PO165H42STA specifications

The Poulan PO165H42STA is a robust and versatile lawn tractor designed to meet the needs of both casual homeowners and more serious landscaping enthusiasts. With its powerful engine, user-friendly features, and efficiency, this riding mower offers a perfect solution for maintaining your lawn with ease and precision.

One of the standout features of the Poulan PO165H42STA is its reliable 16.5 HP Briggs & Stratton engine. This engine is specifically designed to deliver powerful performance, ensuring that the tractor can handle a variety of mowing tasks, from regular lawn mowing to tackling dense grass and tough terrains. The engine also operates quietly, which contributes to a more pleasant mowing experience.

The PO165H42STA is equipped with a 42-inch cutting deck, featuring a three-blade system that provides a clean and even cut across different types of grass. This wide cutting deck allows the tractor to cover more ground in less time, making it a practical choice for larger lawns. Furthermore, the height adjustment feature enables users to customize the cutting height to achieve the desired grass length, ensuring optimal results in various weather conditions.

The tractor's automatic transmission allows for smooth and easy operation, providing a single pedal to control both speed and direction. This ease of use makes the Poulan PO165H42STA accessible for users of all experience levels. Its zero-turn radius capability means that users can navigate around obstacles such as trees and flower beds with incredible agility, enhancing efficiency during mowing sessions.

In terms of comfort, the ergonomic seat is designed for extended periods of use, with good back support and cushioning. This feature is essential for those who may spend several hours tending to their lawns. The intuitive dashboard includes all the necessary controls, making it easy for users to concentrate on mowing without constantly looking down at controls.

Additionally, the Poulan PO165H42STA is equipped with a durable construction that ensures longevity and minimal maintenance requirements. The sturdy steel frame and reliable components are built to withstand the rigors of regular use, highlighting Poulan's commitment to quality.

Overall, the Poulan PO165H42STA combines power, efficiency, and comfort, making it an excellent choice for homeowners looking for a dependable lawn tractor to maintain their outdoor spaces. Its thoughtful design and advanced technologies simplify lawn care, making it a valuable addition to any gardening toolkit.