Poulan PO165H42STA manual To Remove Wheel for Repairs See Fig, Replacing Battery See Figs

Page 22

SERVICE AND ADJUSTMENTS

TO REMOVE WHEEL FOR REPAIRS (See Fig. 26)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 26

TO START ENGINE WITH A WEAK BATTERY (See Fig. 27)

CAUTION: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the CUSTOMER RESPON- SIBILITIES section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT NEGATIVE GROUNDED SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT NEGATIVE GROUNDED SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect each end of the RED cable to the POSITIVE (+) terminal of each battery, taking care not to short against chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal of fully charged battery.

•Connect the other end of the BLACK cable to good CHASSIS GROUND, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

POSITIVE TERMINAL

 

NEGATIVE TERMINAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHASSIS

 

 

CABLES

POSITIVE TERMINAL

CHARGED

BATTERY

 

 

NEGATIVE TERMINAL

FIG. 27

REPLACING BATTERY (See Figs. 28 and 29)

CAUTION: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acciden- tal grounding.

•Lift seat pan to raised position.

•Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

•Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

FIG. 28

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model NO. PO165H42STA General Operation IV. ServiceSafe Operation Practices for Ride-On Mowers II. Slope OperationTable of Contents Product Specifications Customer ResponsibilitiesKey Unassembled PartsSteering Wheel Seat Slope SheetHOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig Lower seat into operating position and sit on seatCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Transport See FigsADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Customer Responsibilities Lubrication ChartService Dates General RecommendationsTractor Engine Muffler CleaningSpark Plugs To Level Mower Housing Service and AdjustmentsTo Install Mower see FIG To Remove Mower see FIGTo Replace Mower Blade Drive Belt See Fig To Adjust Brake See FigBelt Installation Belt RemovalTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral Adjustment See FigTransmission REMOVAL/REPLACEMENT To Replace Motion Drive Belt See FigTo Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Attach Jumper CablesInterlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO165H42STAElectrical KEY Part Description Chassis and Enclosures KEY Drive KEY Part Description Steering Assembly KEY Part NO. NO. Description Engine KEY Part Description Seat Assembly Decals Wheels & TiresMower Lift Nut Lock w/Wsh 1/2-13 Unc Mower Deck Repair Parts Service Notes Service Notes Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

PO165H42STA specifications

The Poulan PO165H42STA is a robust and versatile lawn tractor designed to meet the needs of both casual homeowners and more serious landscaping enthusiasts. With its powerful engine, user-friendly features, and efficiency, this riding mower offers a perfect solution for maintaining your lawn with ease and precision.

One of the standout features of the Poulan PO165H42STA is its reliable 16.5 HP Briggs & Stratton engine. This engine is specifically designed to deliver powerful performance, ensuring that the tractor can handle a variety of mowing tasks, from regular lawn mowing to tackling dense grass and tough terrains. The engine also operates quietly, which contributes to a more pleasant mowing experience.

The PO165H42STA is equipped with a 42-inch cutting deck, featuring a three-blade system that provides a clean and even cut across different types of grass. This wide cutting deck allows the tractor to cover more ground in less time, making it a practical choice for larger lawns. Furthermore, the height adjustment feature enables users to customize the cutting height to achieve the desired grass length, ensuring optimal results in various weather conditions.

The tractor's automatic transmission allows for smooth and easy operation, providing a single pedal to control both speed and direction. This ease of use makes the Poulan PO165H42STA accessible for users of all experience levels. Its zero-turn radius capability means that users can navigate around obstacles such as trees and flower beds with incredible agility, enhancing efficiency during mowing sessions.

In terms of comfort, the ergonomic seat is designed for extended periods of use, with good back support and cushioning. This feature is essential for those who may spend several hours tending to their lawns. The intuitive dashboard includes all the necessary controls, making it easy for users to concentrate on mowing without constantly looking down at controls.

Additionally, the Poulan PO165H42STA is equipped with a durable construction that ensures longevity and minimal maintenance requirements. The sturdy steel frame and reliable components are built to withstand the rigors of regular use, highlighting Poulan's commitment to quality.

Overall, the Poulan PO165H42STA combines power, efficiency, and comfort, making it an excellent choice for homeowners looking for a dependable lawn tractor to maintain their outdoor spaces. Its thoughtful design and advanced technologies simplify lawn care, making it a valuable addition to any gardening toolkit.
Top Page Image Contents