Poulan PO1742STC manual HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig

Page 7

ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

•Lift seat pan to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model NO. PO1742STC Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine See Fig Mowing TipsBefore Each USE MaintenanceLubrication Chart General RecommendationsTractor Transaxle Cooling Clean AIR ScreenEngine BeltsSpark Plugs CleaningEngine Cooling Fins See Fig MufflerTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigTo Remove Wheel for Repairs See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Remove CABLES, Reverse Order To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Attach Jumper CablesTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PO1742STC SchematicElectrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk 170 Drive Steering Assembly Nut Hex Jam Toplock 1/2-20 Unf Optional Equipment EngineSeat Assembly Wheels & Tires DecalsMower Lift Mower Deck Repair Parts Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation

PO1742STC specifications

The Poulan PO1742STC is a robust and versatile lawn tractor designed to meet the needs of both residential and semi-professional users. Engineered to provide optimum performance and reliability, this machine is a go-to solution for maintaining expansive lawns, gardens, and recreational areas.

One of the standout features of the PO1742STC is its powerful 17.5-horsepower Briggs & Stratton engine. This air-cooled, single-cylinder engine provides ample power, making it capable of tackling various terrain conditions and grass thickness. Coupled with an automatic transmission, operators can experience smooth and effortless speed adjustments without needing to shift gears manually.

The cutting system on the Poulan PO1742STC boasts a 42-inch cutting deck, equipped with twin blades. This setup not only offers an impressive cutting width, allowing users to cover more ground efficiently, but also delivers a clean and precise cut. The adjustable cutting height feature enables operators to choose from six different settings, ensuring the perfect lawn finish whether they desire a closer trim or taller grass for cooler months.

Another remarkable aspect of this lawn tractor is its user-friendly design. The comfortable high-back seat promotes an ergonomic riding experience, reducing fatigue during longer mowing sessions. The easy-to-reach controls and large steering wheel add to the convenience, facilitating a smooth and manageable operation.

In terms of technology, the Poulan PO1742STC is equipped with an innovative cutting height adjustment lever, making it simple to modify grass height on the go. This feature, combined with the tractor's tight turning radius, enhances maneuverability, allowing users to navigate around flowerbeds and other obstacles with ease.

Moreover, the lawn tractor's durable build quality ensures longevity and resistance against wear and tear. The steel frame and robust components stand up to prolonged use, making it an excellent investment for homeowners and lawn care professionals alike.

The Poulan PO1742STC is also compatible with various attachments, expanding its functionality. Users can attach a bagger, mulcher, or even a snow blade, transforming the tractor into an all-season tool.

In summary, the Poulan PO1742STC is an efficient, power-packed lawn tractor featuring a dependable engine, versatile cutting deck, user-friendly controls, and adaptability for various tasks. Its combination of performance, durability, and convenience makes it a solid choice for anyone looking to maintain their outdoor space effectively.
Top Page Image Contents