troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
SYMPTOM |
|
|
|
| Check/Remedy |
|
|
|
|
|
|
Disc tray does not open. | • Is the power cord plugged securely into the outlet? | ||||
| • Turn off the power and then turn it back on. | ||||
|
|
|
|
|
|
Playback does not start | • Are you using a deformed disc or a disc with scratches on | ||||
immediately when the | the surface? | ||||
Play/Pause button is pressed. | • Wipe the disc clean. | ||||
|
|
|
|
|
|
Sound is not produced. | • No sound is heard during fast playback, slow playback, and | ||||
| step motion playback. | ||||
| • Are the speakers connected properly? Is the speaker setup | ||||
| correctly customized? | ||||
| • Is the disc severely damaged? | ||||
|
|
|
|
|
|
Sound can be heard only from a | • When listening to a CD or radio, sound is output to the front | ||||
few speakers and not all six. | speakers (L/R) only. Select "PRO LOGIC II" by pressing | ||||
|
|
|
|
| PL II (Dolby Pro Logic II) on the remote control to use all |
|
|
|
| ||
| six speakers. | ||||
| • Make sure that the DVD disc is | ||||
| • If you set C, SL, and SR to NONE in the speaker mode in the | ||||
| audio setup of the setup screen, no sound is heard from the | ||||
| center speaker and the front left and right speakers. Set C, | ||||
| SL, and SR to SMALL. | ||||
|
|
|
|
|
|
Dolby Digital 5.1 CH Surround | • Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby | ||||
Sound is not produced. | Digital 5.1 CH Surround Sound is produced only if the disc is | ||||
| recorded with 5.1 channel sound. | ||||
| • Is the audio language correctly set to DOLBY DIGITAL 5.1- | ||||
| CH in the information display? | ||||
|
|
|
|
|
|
The remote control does not | • Is the remote control being operated within its operation | ||||
work. | range of angle and distance? | ||||
| • Are the batteries exhausted? | ||||
| • Have you selected the mode(TV/DVD) functions of the | ||||
| remote control (TV or DVD) correctly? | ||||
|
|
|
|
|
|
• Disc is rotating but no | • Is the TV power on? | ||||
picture is produced. | • Are the video cables connected properly? | ||||
• Picture quality is poor and | • Is the disc dirty or damaged? | ||||
picture is shaking. | • A poorly manufactured disc may not be playable. | ||||
| |||||
|
|
|
|
|
|
SYMPTOM | Check/Remedy |
| |
Audio language and subtitles do • Audio language and subtitles will not work if the disc does | |
not work. | not contain them. |
|
|
Menu screen does not appear | • Are you using a disc that does not contain menus? |
even when the menu function is |
|
selected. |
|
|
|
Aspect ratio cannot be changed. | • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER |
| BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be |
| seen in 4:3 ratio only. Refer to the DVD disc jacket and then |
| select the appropriate function. |
•The main unit is not working. • Turn off the power and hold the STOP (¦) button on the
(Example: The power goes out main unit for longer than 5 seconds (reset function). or strange noise is heard.)
• The DVD player is not working | Using the RESET function will erase all stored settings. |
normally. | Do not use this unless necessary. |
|
|
The password for rating level has | • While “NO DISC” message appears on the display of main |
been forgotten. | unit, hold the main unit's STOP (¦) button for longer than 5 |
| seconds. “INITIAL” appears on the display and all settings will |
| return to the default values. |
| • Press the POWER button. |
| Using the RESET function will erase all stored settings. |
| Do not use this unless necessary. |
|
|
Can't receive radio broadcast. | • Is the antenna connected properly? |
| • If the antenna's input signal is weak, install an external FM |
| antenna in an area with good reception. |
ENG
● TROUBLESHOOTING
64 | 65 |
