Samsung HT-TZ212 Setting The Delay Time, Using The Test Tone, Setting The Audio, system setup

system setup

SETTING THE DELAY TIME

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

1.In Stop mode, press the MENU button.

2.Press the Cursor ▼ button to move to Audio and then press the ENTER button.

3.Press the Cursor ▼ button to move to DELAY TIME and then press the ENTER button.

4.Press the Cursor S,T,W,X button to move to the desired speaker and then press the ENTER button.

5.Press the Cursor W,X to set the Delay time.

•You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers.

USING THE TEST TONE		ENG
Use the Test Tone feature to check the speaker connections.
1.	In Stop mode, press the MENU button.
2.	Press the Cursor ▼ button to move to Audio and then press the
	ENTER button.

3.Press the Cursor ▼ button to move to TEST TONE and then press the ENTER button.

• The test tone will be sent to L ➞ C ➞ R ➞ SR ➞ SL ➞ SW in	MOVE ENTER	RETURN EXIT
order.		●
		SYSTEM
If the ENTER button is pressed again at this time, the test tone
will stop.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.		SETUP
	STOP	EXIT

SETTING THE AUDIO

You can adjust the balance and level for each speaker.

1.In Stop mode, press the MENU button.

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the fi gure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance
between	0.00 m	0.34 m	0.68 m	1.06 m	1.40 m	1.76 m
Df and Dc
Delay Time	0 ms	1 ms	2 ms	3 ms	4 ms	5 ms

Setting REAR SPEAKER

If the distance of Dc is equal to or longer than the distance of Dr in the fi gure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance
between	0.00 m 1.06 m 2.11 m 3.16 m 3.62 m 5.29 m
Df and Dc

Ideal CENTER SPEAKER placement

Ideal

REAR SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTER SPEAKER

Dr: The distance from REAR SPEAKER

2. Press the Cursor ▼ button to move to Audio and then press the ENTER button.

3. Press the Cursor ▼ button to move to SOUND EDIT and then press the ENTER button.

4. Press the Cursor S,T button to select and adjust the desired item. MOVE ENTER RETURN EXIT Press the Cursor W,X button to adjust the settings.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

MOVE CHANGE RETURN EXIT

Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms

M With PL II (Dolby Pro Logic II), the delay time may be different for each mode.

With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

The Center channel is only adjustable on 5.1 channel discs.

56 57