Poulan PR17542STA owner manual Engine

Page 16

CUSTOMER RESPONSIBILITIES

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

•Rinse the battery with plain water and dry.

•Clean terminals and battery cable ends with wire brush until bright.

•Coat terminals with grease or petroleum jelly.

•Reinstall battery (See “REPLACING BATTERY” in the SERVICE AND ADJUSTMENTS section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/ dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Fig. 12)

Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove drain plug.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

AIR SCREEN

OIL FILL CAP¦DIPSTSICK

OIL DRAIN PLUG

FIG. 12

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

CLEAN AIR INTAKE/COOLING AREAS

To insure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PR17542STA Safety Rules IV. ServiceGeneral Operation II. Slope OperationTable of Contents Product Specifications Customer ResponsibilitiesUnassembled Hardware Steering WheelSeat Keys Slope SheetAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for Mulching To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine See Fig Mowing TipsMulching Mowing Tips General Recommendations Lubrication Chart Service DatesCustomer Responsibilities Before Each USETractor Engine Cleaning Engine OIL FilterMuffler Spark PlugsTo Install Mower see FIG Service and AdjustmentsTo Remove Mower see FIG To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Transaxle Gear Shift Lever Neutral Adjustment See FigTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Choke Control See Fig To Adjust Throttle Control Cable See FigTo Adjust Carburetor Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWhen operator leaves Schematic Tractor - Model Number PR17542STAElectrical KEY Part NO. NO. Description Chassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly 180656 Wheel Steering Seat Assembly Decals Wheels and TiresEngine 170771 Control Th/ch Flag Mower Deck Repair Parts Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Limited Warranty Policy Fold Along This Dotted Line Degree Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

PR17542STA specifications

The Poulan PR17542STA is a versatile and powerful lawn mower designed for homeowners seeking efficiency and reliability in their lawn care routine. This self-propelled gas lawn mower features a robust 175cc engine, delivering ample power to tackle various grass types and sizes. Its 21-inch cutting deck is perfect for navigating through tight spaces while providing a broad cutting path, making lawn maintenance both quick and efficient.

One of the standout features of the PR17542STA is its self-propulsion system. The adjustable drive speed allows users to set the pace that best suits their comfort level and working conditions, making it ideal for a range of user abilities. The rear-wheel drive provides excellent traction, particularly on uneven terrain or inclined yards.

The mower comes equipped with a three-in-one cutting system, which offers the flexibility of mulching, side discharge, or bagging grass clippings. This adaptability allows users to choose the most suitable method for their lawn’s needs, promoting optimal lawn health and appearance. Additionally, the 18-gallon grass bag minimizes the frequency of emptying, allowing for uninterrupted mowing sessions.

With an emphasis on user comfort and convenience, the PR17542STA features an ergonomic handle that can be easily adjusted to suit the height of the user. The foldable design of the handle allows for compact storage, making it easy to fit in tight spaces or garages.

Durability is a key characteristic of this mower, as it is constructed with high-quality materials designed to withstand regular use. The rugged wheels and deck ensure reliable performance across various ground conditions. Furthermore, Poulan’s commitment to customer satisfaction is evident in the accessible service and support options available for owners of the PR17542STA.

In terms of maintenance, the easy-access oil fill and drain ports simplify routine servicing, promoting a longer lifespan for the mower. The Poulan PR17542STA is not just a tool; it is an essential partner in maintaining a beautiful lawn, marrying performance with user-centric features to meet the demands of modern lawn care. Whether you’re a seasoned gardener or a first-time homeowner, this mower is designed to deliver exceptional results with every mow.
Top Page Image Contents