Poulan PPR17H42STC To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Operate on Hills

Page 12

OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 7)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

•Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

3/8-16

LOCKNUT

GUAGE WHEEL

 

MOUNTING

 

BRACKET

SHOULDER

3/8 WASHER

BOLT

 

GAUGE WHEEL

 

FIG. 7

TO OPERATE MOWER (See Fig. 8)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION ATTACHMENT LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT

DEFLECTOR

CLUTCH LEVER

SHIELD

"DISENGAGED"

 

POSITION

 

FIG. 8

12

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 5 and 9)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attach- ment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

FIG. 9

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PPR17H42STC Safety Rules Safe Operation Practices for Ride-On MowersBecome ALERT!!! Your Safety is IN- Volved Table of Contents Unassembled Parts Steering Wheel SeatBlades Gauge WheelsAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for MulchingTo Convert to Bagging or Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Mower Cutting Height See Fig Stopping See FigTo SET Parking Brake See Fig To USE Throttle Control See FigTo Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL Level See FigADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing Tips¿ Lubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemEngine Cleaning MufflerSpark Plugs Service and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigBelt Installation To Replace Mower Blade Drive Belt See FigBelt Removal To Adjust Brake See Fig Transmission REMOVAL/REPLACEMENTTransaxle Motion Control Lever Neutral ADJUSTMENTSee Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigReplacing Battery See Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PPR17H42STCNON-REMOVABLE Connections Removable Electrical KEY Part NO. NO.DESCRIPTION Chassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly KEY Part NO. NO.DESCRIPTION Seat Assembly Decals Wheels and TiresEngine Optional EquipmentSpark Arrester KEY Part NO. NO.DESCRIPTION Mower Deck KEY Part Description Tractor Model Number PPR17H42STC Mower Lift159460 Wire Asm Inner/Sprg W/plunger LT Service Notes Service Notes Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideParts and Service

173284, PPR17H42STC specifications

The Poulan Pro PPR17H42STC is a versatile lawn tractor that is designed to deliver exceptional performance in maintaining your lawn and garden. This powerful machine offers a combination of advanced features, robust technology, and user-friendly characteristics, making it an ideal choice for both homeowners and landscape professionals.

One of the standout features of the Poulan Pro PPR17H42STC is its robust 17.5-horsepower Briggs & Stratton engine. This reliable engine provides ample power to tackle a variety of mowing tasks efficiently, ensuring that even thick grass and uneven terrain are no match for its performance. Coupled with a hydrostatic transmission, this lawn tractor offers smooth acceleration and easy maneuverability, allowing the operator to navigate tight corners and challenging landscapes with ease.

The PPR17H42STC also boasts a 42-inch reinforced cutting deck, which is designed for durability and strength while delivering a professional-quality cut. The deck features a side-discharge capability, enabling the user to disperse clippings evenly across the lawn, promoting healthy grass growth. Additionally, the cutting height can be easily adjusted to suit varying lawn conditions, making it adaptable to changing seasons and grass types.

Another notable characteristic of this model is its ergonomic design, which includes a comfortable seat and user-friendly control layout. The high back seat provides support during longer mowing sessions, while the pedal-operated controls are intuitive, ensuring that users can focus on mowing without struggling with complicated mechanisms.

In terms of technology, the PPR17H42STC is equipped with a range of innovations aimed at enhancing the mowing experience. The integrated headlights provide improved visibility during early morning or late evening mowing sessions, while the easy-to-use ignition switch allows for quick and hassle-free starting.

Furthermore, this lawn tractor features a built-in mulching capability, allowing users to recycle grass clippings back into the lawn. This not only reduces yard waste but also provides essential nutrients to the soil, fostering a healthier lawn.

In summary, the Poulan Pro PPR17H42STC is a powerful, efficient, and user-friendly lawn tractor that combines advanced technology with practical features. Whether you are maintaining a small garden or a large lawn, this machine is designed to meet your needs effectively.
Top Page Image Contents