Jensen Tools XA2125 Inputs, RCA Output, Remote Level Control, Input Wiring, Connecting other Amps

®

XA2125, XA275, XA250

Inputs, RCA Output, Remote Level Control

XA2125

XA275

XA250

Input Wiring

	INPUT	REMOTE	HI LEVEL	OUTPUT
		BASS
L	R			L	R

LOW INPUT		HI INPUT	OUTPUT
L	R		L	R

Low Level Input (RCA Input)

Low level (RCA) input is preferred for best performance. Most trunk/hatchback installations will require a 15-20 foot RCA cable. While pick- up trucks and under-seat mounting will require

a6-10 foot RCA cable. Connect an RCA cable from your receiver to the RCA input on your amplifier.

High Level Input

High level input should be used when an RCA output is not available from the receiver. Connect the speaker outputs from the receiver to the high level input connector.

White = Left (+)

White/Black = Left (–)

Gray = Right (+)

Gray/Black = Right (–)

Black (ground)

Important

Only connect the low (RCA) or high level input. Do not use both at the same time.

Radio

L RL R + – – +

Splice

(as necessary)

INPUT	REMOTE	HI LEVEL
	BASS

LR

Low Level or Hi Level

Connecting other Amps

OUTPUT

LR

RCA Output

The “output” signal allows you to conveniently connect other amplifiers to each other.

6

6236 XA2CH_E.p65 6 5/7/01, 2:07 PM