Poulan PO14542B owner manual Engine, Battery, Belts, Transaxle Cooling, Lubrication

Page 16

CUSTOMER RESPONSIBILITIES

BATTERY

Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•Open battery box door.

•Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

•Rinse the battery with plain water and dry.

•Clean terminals and battery cable ends with wire brush until bright.

•Coat terminals with grease or petroleum jelly.

•Reinstall battery (See “REPLACING BATTERY” in the Service and Adjustments section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

°F

-20°

0°

 

 

30° 32° 40°

 

 

60°

80°

 

100°

°C

-30°

-20°

-10°

0°

10°

20°

30°

40°

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

FIG. 11

TO CHANGE ENGINE OIL (See Fig. 11 and 12)

Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove cap from bottom fitting of drain valve and install the drain tube onto the fitting.

•Unlock drain valve by pushing inward and turning coun- terclockwise.

•To open, pull out on the drain valve.

•After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

•Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

 

OIL DRAIN VALVE

CLOSED

 

AND

 

LOCKED

 

POSITION

 

 

DRAIN

CAP

TUBE

 

FIG. 12

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model NO. PO14542B Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents Product Specifications Customer ResponsibilitiesSteering Wheel Seat Unassembled PartsKeys Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsADD Gasoline Mowing TipsTo Start Engine See Fig ¿ Lubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen See Fig To Service PRE-CLEANERTo Service Cartridge Engine Cooling Fins See FigCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERReplacing Battery See To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust Carburetor See FigPreliminary Setting Final SettingStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO14542BElectrical 2122175566 175158175141 Chassis and Enclosures 155924X012 Drive 117 110 111 115154407 Bellcrank Clutch 174973173898 Steering Assembly KEY Part NO. NO. Description Engine 148315 17055117060620 Seat Assembly Decals Wheels & TiresMower Lift Nut Lock w/Wsh 1/2-13 Unc Mower Deck 165898 171977174284 Service Notes Limited Warranty C U M SEH Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill

PO14542B specifications

The Poulan PO14542B is a robust lawn mower designed to provide efficient cutting performance with user-friendly features. Ideal for homeowners with medium to large yards, this mower effectively combines power, durability, and convenience, making it a popular choice in the landscaping segment.

One of the most notable features of the Poulan PO14542B is its powerful engine. Equipped with a reliable 14.5 HP Briggs & Stratton engine, it delivers ample power to tackle even the toughest grass conditions. This engine provides the necessary torque to ensure consistent cutting performance, allowing users to mow through thick grass without bogging down.

A significant aspect of the Poulan PO14542B is its cutting deck, which measures 42 inches wide. This size strikes a perfect balance between maneuverability and mowing capacity, allowing users to cover more ground in less time. The deck features a durable construction that ensures longevity and performance. Additionally, it provides a 6-position manual height adjustment system, enabling users to customize their cutting height for different grass types and seasonal conditions.

The mower also incorporates efficient technologies that enhance the mowing experience. One such technology is the automatic choke, which simplifies starting the engine. This user-friendly feature minimizes the need for manual adjustments, allowing for easier and faster starts, even after long periods of inactivity.

The Poulan PO14542B is designed with comfort in mind. It features a comfortable, ergonomic seat that provides support during extended mowing sessions. The steering system is also intuitive, allowing for smooth navigation around obstacles in the yard.

Safety is a crucial aspect of this mower, incorporating features such as an operator presence control that immediately shuts off the mower if the operator leaves the seat. This design enhances safety, providing peace of mind while operating the mower.

Maintenance is made easier with accessible components and a durable build that is resistant to wear and tear. The mower's compact design also allows for easy storage, making it an excellent choice for homeowners looking for efficiency and reliability in lawn care.

In summary, the Poulan PO14542B is a versatile lawn mower that delivers impressive power, user-centric features, and safety measures, making it a reliable companion for backyard maintenance. Its combination of performance, comfort, and ease of use makes it a valuable investment for any homeowner aiming to achieve a well-groomed lawn.
Top Page Image Contents