Poulan PKGTH2554 Tools Required for Assembly, To Remove Tractor from Carton, Unpack Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)

3/4" wrench

(1)

Tire pressure gauge

(1)

9/16" wrench

(1)

Utility knife

(2)

1/2" wrenches

(1)

Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Remove mower and packing materials.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

•Remove locknut and large flat washer from steering shaft.

•Position front wheels of the tractor so they are pointing straight forward.

•Slide the steering sleeve over the steering shaft.

•Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

•Secure steering wheel to steering shaft with locknut and large flat washer previously removed. Tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

STEERING WHEEL

INSERT

LOCK NUT

LARGE FLAT WASHER

STEERING WHEEL

STEERING WHEEL ADAP- TOR

STEERING

SHAFT

STEERING

SLEEVE

 

 

 

8

 

 

1

 

8

 

2

 

 

0

 

 

 

FIG. 1

CHECK BATTERY (See Fig. 2)

•Lift hood to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

LABEL

02173

FIG. 2

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Always Wear EYE Protection During OperationSafe Operation Practices for Ride-On Mowers General OperationII. Slope Operation III. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig Assemble Gauge Wheels to Mower Deck SeeInstall Mower and Drive Belt Sees To Attach Nose Roller See FigCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Height Adjustment Knob Used to adjust the mower height Know Your TractorHOW to USE Your Tractor To Operate Mower See Fig To Adjust Gauge Wheels See FigUsing the Reverse Operation System Reverse Operation System ROSCheck Engine OIL Level Before Starting the EngineTowing Carts and Other ATTACH- Ments ADD GasolineMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceLubrication Chart Before Each USETractor Blade Removal See FigTo Sharpen Blade See Fig Engine Cleaning To Level Mower Housing Service and AdjustmentsTo Install Mower To Remove Mower See FigFRONT-TO-BACK Adjustment See Figs Mower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt See Fig Belt RoutingTransaxle Motion Control Lever Neutral Adjustment See Fig To Adjust Attachment Clutch See FigTo Check and Adjust Brake Transmission REMOVAL/REPLACEMENTFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery See Fig To Remove Wheel for RepairsTo Adjust Carburetor To Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control Interlocks and RelaysEngine OIL OtherFuel System CylindersTroubleshooting Points Problem Cause CorrectionEngine dies when Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

PKGTH2554 specifications

The Poulan PKGTH2554 is a robust and versatile lawn tractor designed to meet the needs of homeowners who desire a reliable machine for maintaining their lawns. Known for its strong performance and a range of useful features, this tractor stands out in the crowded market of residential lawn care equipment.

At the heart of the PKGTH2554 is its powerful 25 HP Kohler engine, which provides ample power to tackle various tasks with ease, whether it’s mowing, bagging, or towing attachments. The engine is equipped with a reliable starter system, ensuring that it fires up quickly and efficiently, making it perfect for both quick lawn care sessions and extended use.

One of the standout features of the PKGTH2554 is its 54-inch cutting deck. This wide deck allows for efficient mowing, covering a larger area in fewer passes, which saves time when maintaining larger lawns. The deck height can be easily adjusted using a lever, giving users the flexibility to choose the perfect cutting height for their lawn's specific needs. This versatility ensures that grass is cut to the desired length, promoting a healthier lawn.

The tractor also boasts a hydrostatic transmission, which enhances maneuverability and ease of use. Unlike traditional gear-driven systems, hydrostatic transmissions allow for smooth and seamless speed adjustments with a simple push of the pedal. This feature is particularly beneficial when navigating around obstacles or working in tight spaces.

In terms of comfort, the PKGTH2554 is equipped with a plush, high-back seat that provides ample support during extended mowing sessions. The user-friendly controls and ergonomic layout of the operator station enhance the overall experience, making it easy for anyone to operate.

For added capability, the PKGTH2554 comes with the option to attach various accessories, including baggers, plows, and other lawn care implements. This adaptability allows homeowners to customize their tractor according to their specific needs and seasonal requirements.

Overall, the Poulan PKGTH2554 delivers a perfect combination of power, versatility, and comfort. With its efficient cutting capabilities, adaptable features, and user-friendly design, it is an excellent choice for homeowners looking to simplify lawn maintenance while achieving professional results.
Top Page Image Contents