Poulan 188870 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 15)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 15)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

SUSPENSION

ENGINE PULLEY

ARMS

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

(BOTH SIDES)

 

 

 

 

LARGE

 

 

HOUSING GUIDE

RETAINER

 

 

 

SPRING

 

 

 

BRACKET

 

DEFLECTOR SHIELD

 

 

 

FIG. 15

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model NO. PO17542STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Belts Clean AIR ScreenEngine Transaxle CoolingMuffler CleaningEngine Cooling System See Fig Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Adjust Brake To Check and Adjust Brake See FigTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel ALIGN- MentReplacing Battery See Figs To Attach Jumper CablesInterlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points When operator leaves seat Service Notes Schematic Tractor - Model Number PO17542ST PO17542STAElectrical KEY Part Description Chassis and Enclosures KEY Drive Shaft Asm Cross Tapered PMST/20 Steering Assembly 160367 Spacer Brace Axle 72110618 Engine Optional EquipmentSeat Assembly Seatlt.bolt1Decals Wheels & TiresMower Lift Mower Deck Repair Parts Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

188870 specifications

The Poulan 188870 is a powerful and versatile chainsaw designed for both professionals and avid gardeners. Engineered for cutting through various types of wood, from hardwoods to softwoods, the Poulan 188870 showcases a combination of performance and ease of use.

One of the standout features of the Poulan 188870 is its robust engine. It incorporates a 18-inch bar and chain that delivers the necessary power for trimming branches, felling small trees, and cutting firewood. The chainsaw is powered by a reliable 50cc two-stroke engine, which is known for its efficiency and ability to handle tough tasks with minimal downtime.

The design of the Poulan 188870 includes advanced technologies aimed at improving user experience. The chainsaw is equipped with an easy-start feature, allowing for a hassle-free ignition. This saves precious time, particularly in situations where quick operation is essential. The Automatic Oiling System ensures that the chain is adequately lubricated during operation, enhancing performance and extending the lifespan of the bar and chain.

Safety is a significant consideration in the design of the Poulan 188870. It features a chain brake that activates in case of kickback, significantly reducing the risk of accidents. Additionally, with its ergonomic handle, the chainsaw is not only comfortable to hold but also minimizes vibrations, making operations smoother and reducing fatigue during prolonged use.

Another attractive characteristic of the Poulan 188870 is its lightweight construction. Weighing just over 12 pounds, it is relatively easy to maneuver, making it suitable for all-day use without causing excessive strain on the user. This is particularly beneficial for homeowners who may not have extensive experience with power tools.

In terms of maintenance, the Poulan 188870 makes it easy for users to perform routine checks and repairs. The accessible air filter and spark plug facilitate straightforward servicing, which is essential for keeping the chainsaw in optimal working condition.

Overall, the Poulan 188870 combines power, efficiency, and safety features that cater to a wide range of users. It stands out as a reliable choice for anyone in need of a dependable chainsaw for gardening or lumber work. Its balance of performance and user-friendly characteristics makes it a favorite among chainsaw enthusiasts.
Top Page Image Contents