Poulan 190785 manual To Replace Mower Blade Drive Belt See Fig, To Check and Adjust Brake See Fig

Page 20

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 18)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Disconnect R.H.suspension arm from rear deck bracket by removing retainer spring.

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work new belt around both mandrel pulleys and idler pulleys.

•Install new belt into engine pulley grove.

•Reconnect R.H. suspension arm and secure with re- tainer spring.

•Make sure belt is in all pulley grooves and inside all belt guides.

 

R.H. SUSPENSION ARM

MANDREL

 

ENGINE

PULLEY

 

PULLEY

 

 

IDLER

RETAINER

 

PULLEYS

SPRING

 

 

 

MANDREL

02373

 

 

 

PULLEY

 

FIG. 18

TO CHECK AND ADJUST BRAKE (See Fig. 19)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

00238

FIG. 19

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model NO. PO15538B Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingCleaning Clean AIR ScreenAIR Filter MufflerTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Start Engine with a Weak Battery See Fig To Adjust Steering Wheel ALIGN- MentTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBERReplacing Battery See Figs To Replace Headlight BulbInterlocks and Relays To Replace FuseTo Remove Hood and Grill Assembly See Fig To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Schematic Tractor - Model Number PO15538BElectrical KEY Part Description Chassis 174643X014 Drive KEY Part NO. NO. Description Steering KEY Part Description Engine Optional Equipment Spark ArresterSeat Seatlt.bolt1Decals Wheels & TiresMower Lift 188822Mower Deck Repair Parts Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

190785 specifications

The Poulan 190785 is a powerful and versatile chainsaw designed for both professional and residential forestry tasks. This model is particularly noted for its reliability and efficiency, making it a popular choice among users who require a robust tool for cutting, pruning, and tree removal.

One of the standout features of the Poulan 190785 is its powerful engine. It typically comes equipped with a 2-cycle gas engine that delivers impressive horsepower, ensuring that users can tackle even the toughest jobs with ease. The engine design focuses on minimizing fuel consumption while maximizing power, which allows for longer operational periods before needing to refuel.

The chainsaw features a 18-inch bar and chain, providing an optimal cutting length for a variety of applications, from trimming branches to felling small to medium-sized trees. The chain speed is notably high, which enhances cutting efficiency and reduces the physical effort needed by the operator. Additionally, the bar is designed with a low kickback feature, enhancing safety during use.

In terms of usability, the Poulan 190785 incorporates several ergonomic designs. The comfortable handle is designed for better grip and control, reducing user fatigue during extended operation. The chainsaw also includes an automatic oiling system, which ensures that the chain operates smoothly, reducing wear and extending the tool's lifespan.

Safety is a priority with the Poulan 190785, which includes features such as a chain brake that immediately stops the chain in case of kickback, protecting the operator from potential injuries. The chainsaw’s lightweight construction further enhances its maneuverability, allowing users to easily navigate around their work environment.

Maintenance is made simpler with the Poulan 190785 due to its easy-access air filter and carburetor, facilitating routine checks and cleaning. This design consideration ensures that the chainsaw remains in peak operating condition, resulting in a longer service life.

In summary, the Poulan 190785 stands out as a well-rounded chainsaw option, combining power, safety, and ease of use. Whether you are a homeowner looking to maintain your yard or a professional needing a reliable tool for forestry work, the Poulan 190785 delivers performance and efficiency to get the job done effectively. Its durable construction and thoughtful features make it a worthwhile investment for anyone seeking a chainsaw they can count on.
Top Page Image Contents