Poulan 187301 manual Cleaning, Muffler, Spark Plugs

Page 18

MAINTENANCE

ENGINE COOLING FINS (See Fig. 13)

Remove any dust, dirt or oil from engine cooling fins to prevent engine damage from overheating.

•Remove screws from blower housing and lift housing and dipstick tube assembly off engine.

•Cover oil fill opening to prevent entry of dirt.

•Use compressed air or stiff bristle brush to thoroughly clean engine cooling fins.

•To reassemble, reverse above procedure.

SCREWS

BLOWER HOUSING

SCREWS

AIR SCREEN

DIPSTICK TUBE

ASSEMBLY

OIL FILL

OPENING

 

SPARK

ENGINE COOLING FINS

PLUG

 

FIG. 13

AIR FILTER (See Fig. 14)

Your engine will not run properly using a dirty air filter. Replace pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

•Pull up on air filter cover handle and rotate towards engine.

•Remove cover.

•Carefully remove air filter cartridge and pre-cleaner from base.

•Clean base carefully to prevent debris from falling into carburetor.

NOTE: If very dirty or damaged, replace cartridge.

•Place new pre-cleaner and cartridge firmly in base.

•Align tabs on cover with slots in blower housing and replace cover.

•Hook handle on cover and push down on handle to close.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean cartridge.

HANDLE

COVER

CARTRIDGE

PRE-CLEANER

TABS

BASE

SLOTS

FIG. 14

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 15)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sec- tions.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP CLAMP

FUEL FILTER

FIG. 15

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model NO. PO17H42STB Safety Rules Safety Rules Table of Contents Key Unassembled PartsSteering Wheel Seat Slope SheetTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs Before Starting the EngineTo Operate Mower See Fig To Operate on HillsPurge Transmission ADD GasolineTo Start Engine See Fig Automatic Transmission Warm UPMowing Tips General Recommendations MaintenanceLubrication Chart Before Each USETractor Engine Cleaning MufflerSpark Plugs To Level Mower Housing Service and AdjustmentsTo Install Mower See Fig To Remove Mower See FigBelt Installation To Replace Mower Blade Drive Belt See FigBelt Removal To Adjust Brake To Check and Adjust Brake See FigTransaxle Motion Control Lever Neutral Adjustment See Fig To Replace Motion Drive Belt See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER Interlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionOFF Schematic Tractor - Model Number PO17H42STBTractor - Model Number PO17H42STB Electrical KEY Part NO. NO. Description Tractor - Model Number PO17H42STB Chassis and Enclosures KEY Part Description Tractor - Model Number PO17H42STB Drive 17000612 Tractor - Model Number PO17H42STB Steering Assembly 17490608 Tractor - Model Number PO17H42STB Engine Optional EquipmentTractor - Model Number PO17H42STB Mower Lift Tractor - Model Number PO17H42STB Seat Assembly Tractor - Model Number PO17H42STB Decals Wheels & TiresTractor - Model Number PO17H42STB Mower Deck 165892 Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXPoulan

187301 specifications

The Poulan 187301 is a specialized lawn care tool designed for both professional landscapers and enthusiastic homeowners. Known for its versatility and performance, this robust piece of equipment stands out in the crowded market of leaf blowers and lawn maintenance devices.

One of the main features of the Poulan 187301 is its powerful engine. Equipped with a reliable two-stroke engine, it delivers excellent airflow at an impressive speed, making it easy to clear leaves, debris, and grass clippings from lawns and driveways. The engine not only ensures top-tier performance but also maintains an environmentally friendly profile thanks to its efficient fuel consumption.

Weight and ergonomics play a crucial role in the usability of the Poulan 187301. Weighing slightly less than many competitors, this leaf blower is designed for extended use without causing undue strain on the operator. The comfortable handle provides a secure grip, allowing users to maneuver it easily around gardens and larger spaces.

The Poulan 187301 boasts an airspeed capacity that can reach up to 200 miles per hour, which translates into swift and effective clearing of debris. The adjustable speed settings allow users to tailor the airflow according to their specific needs, ensuring optimal performance whether dealing with wet leaves or light dust and sand.

Another key characteristic of this model is its ease of start. The Poulan 187301 incorporates advanced starting technology that minimizes the effort required to get the blower running, an essential feature for those who want to avoid frustration when starting up their equipment.

In terms of design, the Poulan 187301 is built to last, with a durable construction that can withstand the rigors of outdoor use. With minimal maintenance required, owners can expect a long lifespan from this equipment, making it a valuable investment.

Moreover, the Poulan 187301 is considered a quieter alternative compared to many other models on the market. This reduced noise level is particularly appealing for residential areas where excessive noise can be an annoyance to neighbors.

In conclusion, the Poulan 187301 combines power, efficiency, and user-friendly features, making it an excellent choice for those seeking to enhance their lawn care routine. With its advanced technologies and focus on user experience, this tool is set to meet the diverse needs of both homeowners and professionals alike.
Top Page Image Contents