Poulan 187009 owner manual To Replace Mower Blade Secondary Drive Belt See Fig

Page 22

SERVICE AND ADJUSTMENTS

•Remove screws from R.H. mandrel cover and remove cover.

•Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

•Disconnect R.H.suspension arm from rear deck bracket by removing retainer spring.

•Roll belt over the top of R.H. mandrel pulley carefully.

•Remove belt from electric clutch pulley.

•Remove belt from idler pulleys.

•Check primary idler arm and two idlers to see that they rotate freely.

•Be sure spring is securely hooked to primary idler arm and spring arm.

MOWER DRIVE BELT INSTALLATION (See Fig. 24)

•Install belt in both idlers.

•Install new belt onto electric clutch pulley.

•Roll belt into upper groove of R.H. mandrel pulley care- fully.

•Carefully check belt routing making sure belt is in the grooves correctly.

•Reconnect R.H. suspension arm to rear deck bracket with retainer spring.

•Reassemble R.H. mandrel cover.

•Engage belt tension rod by pushing rod into locking bracket.

BELT

 

RH

RH MANDREL

TENSION ROD

 

 

SUSPENSION

COVER

(DISENGAGED

 

 

ARM

 

POSITION)

 

 

 

 

 

 

IDLER

ELECTRIC

 

PULLEY

CLUTCH

 

 

 

PULLEY

 

 

 

IDLER

 

 

 

PULLEY

SPRING

 

 

 

ARM

 

 

 

PRIMARY

 

 

IDLER ARM

R.H.

 

 

 

02513

 

 

MANDREL

 

 

 

FIG. 24

TO REPLACE MOWER BLADE (SECONDARY) DRIVE BELT (See Fig. 25)

Park the tractor on level surface. Engage parking brake.

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

•Remove screws from R.H. and L.H. mandrel covers and remove covers.

REMOVE MOWER DRIVE BELT

(Refer to “TO REMOVE MOWER DRIVE BELT” illustration in this section of manual).

•Carefully roll belt over the top of R.H. mandrel pulley.

•Remove belt from idler pulleys.

•Check primary idler arm and two idlers to see that they rotate freely.

•Be sure spring is securely hooked to primary idler arm and spring arm.

REMOVE MOWER BLADE (SECONDARY) DRIVE BELT

•Carefully roll belt off L.H. mandrel pulley.

•Remove belt from center mandrel pulley, idler pulley, and R.H. mandrel pulley.

•Remove any dirt or grass which may have accumulated around mandrels and entire upper deck surface.

•Check secondary idler arm and idler pulley to see that they rotate freely.

•Be sure spring is hooked in secondary idler arm and secondary spring arm.

INSTALL NEW MOWER BLADE (SECONDARY) DRIVE BELT

•Install new belt in lower groove of R.H. mandrel pulley, idler pulley, and center mandrel pulley as shown.

•Carefully roll belt over L.H. mandrel pulley. Make sure belt is in all grooves properly.

REINSTALL MOWER DRIVE BELT

(Refer to “TO REMOVE MOWER DRIVE BELT” illustration in this section of manual).

•Install belt into upper groove of R.H. mandrel pulley and around both idlers. Pull belt to front of mower to remove slack.

•Reinstall mandrel covers and securely tighten all screws.

•Carefully check belt routing making sure belt is in all grooves correctly.

•Reinstall mower to tractor (See “TO INSTALL MOWER” in this section of manual).

 

SECONDARY

L.H.

IDLER ARM

MANDREL

IDLER PULLEY

 

SPRING

 

SECONDARY

 

SPRING ARM

 

CENTER

 

MANDREL

 

R.H.

 

MANDREL

 

COVER

 

02515

FIG. 25

TO CHECK AND ADJUST BRAKE (See Fig. 26)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PD20PH48STC Safety Rules Safety Rules Table of Contents Seat Nose Roller Unassembled PartsSteering Wheel Gauge Wheels MowerHOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See FigInstall Mower and Drive Belt See Figs To Attach Nose Roller See FigCheck for Proper Position of ALL Belts Check Tire PressureCheck Mower Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Transport See FigsCheck Engine OIL Level Before Starting the EngineTowing Carts and Other ATTACH- Ments ADD GasolineMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceLubrication Chart Before Each USETractor Engine Muffler CleaningClean AIR INTAKE/COOLING Areas Spark PlugsTo Install Mower Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing To Replace Mower Drive BeltTo Check and Adjust Brake See Fig To Replace Mower Blade Secondary Drive Belt See FigTo Replace Motion Drive Belt See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs See Fig Replacing Battery See FigTo Start Engine with a Weak Battery See Fig To Replace Headlight BulbInterlocks and Relays To Adjust CarburetorTo Replace Fuse Fuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor Model Number PD20PH48STCElectrical KEY Part Description Chassis and Enclosures Repair Parts Drive Drive KEY Part NO. NO. DescriptionSteering Assembly 180656 Wheel Steering Engine Stem Tank Fuel Seat Assembly Decals Wheels & TiresMower Lift KEY Part NO. NO. Description Mower Deck 175820 Pulley Idler Flat Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

187009 specifications

The Poulan 187009 is a versatile and powerful chainsaw designed for both homeowners and professional users seeking an efficient cutting tool for various tasks. Recognized for its durability and practicality, the Poulan 187009 stands out with a range of features and characteristics that make it a popular choice among users.

One of the main features of the Poulan 187009 is its robust engine. Equipped with a 18-inch bar and powered by a 42cc two-stroke engine, this chainsaw delivers impressive performance for cutting through thick limbs, logs, and even small trees. The engine's design ensures reliable starting and smooth operation, allowing users to tackle tough jobs with confidence.

In terms of technology, the Poulan 187009 boasts a clean air filtration system, which significantly extends the life of the engine by keeping dirt and debris out. This feature enhances the chainsaw's efficiency and reduces the frequency of maintenance, making it ideal for those who prefer a low-maintenance cutting tool. Additionally, the chainsaw is designed with an easy-to-access oil reservoir, which ensures proper lubrication for optimal performance during operation.

User comfort is a key consideration in the design of the Poulan 187009. The chainsaw features a lightweight frame that not only reduces fatigue during extended use but also enhances maneuverability. The anti-vibration system included in its design minimizes hand and arm fatigue, allowing users to work longer without discomfort. The chainsaw also has an ergonomic handle, providing a secure grip for increased control and stability during cutting.

Safety is paramount when working with heavy equipment, and the Poulan 187009 includes several features to ensure user protection. It is equipped with a chain brake that stops the chain instantly in the event of kickback, a common hazard in chainsaw operation. Additionally, the chainsaw features a throttle lock-out that prevents accidental startup, enhancing overall safety while using the tool.

In summary, the Poulan 187009 combines power, efficiency, and safety features to cater to both novice and experienced users. Its strong engine, low-maintenance technologies, and user-friendly design make it an excellent choice for garden maintenance, storm cleanup, and general outdoor projects. Whether cutting firewood or tackling larger yard work tasks, the Poulan 187009 is a reliable companion that delivers consistent results.
Top Page Image Contents