Poulan 183981 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse, Engine

Page 23

SERVICE AND ADJUSTMENTS

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 27)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

FIG. 27

ENGINE

TO ADJUST THROTTLE CONTROL CABLE (See Fig. 28)

The throttle control has been preset at the factory and adjustment should not be necessary. Check adjustment as described below before loosening cable. If adjustment is necessary, proceed as follows:

•With engine not running, move throttle control lever from slow to choke position. Slowly move lever from choke to fast position.

•Check that holes “A” in governor control lever and hole in governor plate line-up. If holes “A” are not aligned, loosen clamp screw and move throttle cable until holes are aligned. Tighten clamp screw securely.

 

GOVERNOR

GOVERNOR

 

CONTROL PLATE

 

CONTROL LEVER

 

 

HOLES “A”

CLAMP

THROTTLE

 

SCREW

CABLE

 

 

FIG. 28

TO ADJUST CARBURETOR

The carburetor has been preset at the factory and adjustment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. If the carburetor does need adjustment, see engine manual.

High speed stop is factory adjusted. Do not adjust - dam- age may result.

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACTYOUR NEAREST AUTHORIZED SERVICE CENTER/ DEPARTMENT, WHICH HAS PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY NECESSARY ADJUSTMENTS.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Model NO. PO1538C II. Slope Operation Safety RulesIV. Service General OperationSafe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Steering Wheel Seat Unassembled PartsBefore Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Check Engine OIL Level Before Starting the EngineTo Operate on Hills To Transport Towing Carts and Other ATTACH- MentsTo Start Engine See Fig Mowing TipsGeneral Recommendations MaintenanceLubrication Chart Service DatesOperator Presence System TractorBrake Operation TiresTransaxle Cooling BatteryEngine BeltsAIR Filter See Fig Clean AIR ScreenEngine Cooling Fins See Fig IN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigFront Wheel TOE-IN/CAMBER To Check and Adjust Brake See FigTo Adjust Steering Wheel ALIGN- Ment To Replace Motion Drive Belt See FigTo Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Remove Wheel for Repairs See FigTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PO1538C, Product Number 954 56 SchematicElectrical KEY Part Description Chassis 5479J Plug Button Blk 359 Dia Choke Drive KEY Part NO. NO. Description Steering 140044X428 Wheel Steering 175131 Axle Asm Optional Equipment Kit Spark Arrestor Flat Scrn Seat Wheels & Tires DecalsMower Lift Nut Jam Hex 1/2-13 Unc Mower Deck 178515 Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

183981 specifications

The Poulan 183981 is a versatile and efficient chainsaw designed to cater to a variety of cutting tasks, making it an ideal choice for both homeowners and professionals. Known for its reliable performance, the Poulan 183981 combines innovative technology with user-friendly features to deliver exceptional results in outdoor projects.

At the heart of the Poulan 183981 is its powerful engine, which ensures high performance and durability. The engine is engineered for excellent fuel efficiency, providing users with extended run times and reduced emissions, contributing to a cleaner environment. This is particularly important for those engaged in prolonged cutting activities, as less time spent refueling means more time available for work.

One of the standout features of the Poulan 183981 is its lightweight design. Weighing less than some of its competitors, it allows for easier maneuverability and reduced fatigue during extended use. This ergonomic consideration makes the saw more accessible for novice users while still meeting the demands of seasoned professionals.

The Poulan 183981 incorporates an automatic oiling system that helps maintain the chain's lubrication during operation. This feature not only enhances the life of the chain and bar but also ensures smoother and more efficient cutting performance. With less maintenance needed, users can focus on the task at hand rather than worrying about the upkeep of their equipment.

Safety is another critical aspect of the Poulan 183981. It comes equipped with an inertia-activated chain brake, which provides an essential layer of safety by stopping the chain's movement in the event of kickback. This feature is particularly important for users who may encounter unexpected situations while cutting.

For added convenience, the Poulan 183981 features an easy-access air filter that simplifies cleaning and maintenance. This ensures optimal engine performance over time, allowing users to get the most out of their investment.

In terms of cutting capabilities, the Poulan 183981 features a high-quality cutting chain and bar that deliver precision and efficiency. Whether performing light pruning or tackling heavier jobs, this chainsaw is designed to handle a wide range of tasks with ease.

Overall, the Poulan 183981 is a well-rounded, reliable chainsaw that combines power, safety, and convenience. Its advanced technologies and practical features make it a valuable tool for anyone looking to enhance their outdoor cutting experience.
Top Page Image Contents