Poulan PZ4822 manual Operation, Training

Page 25

OPERATION

Operation

Read "Safety Instructions" section and following pages, if you are unfamiliar with the machine.

Training

Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities.

We suggest when first operating the mower, use a reduced throttle speed and reduced ground speed by NOT moving control levers to the furthest forward or reverse positions during initial operation, or until operator becomes comfortable with controls. We also suggest first time users, or new users to ZeroTurn mowers to become familiar with the mowers movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until operator becomes comfortable with mower controls and zero turning capability, they may damage turf due to over aggressive maneuvers.

To move forward and backward

The direction and speed of the mowers movements is effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel. The right control lever controls the right wheel.

IMPORTANT INFORMATION

When control levers are in the reverse position they return to neutral when released. This may cause the mower to suddenly stop.

First time users should push mower (see "Moving by Hand" in the "Operation" section) to an open, flat area, without other people or vehicles/obstacles near by. In order to move unit under its own power, the operator must be in the seat, start engine (see "Before Starting" in "Operation" section), adjust engine speed to idle, disengage parking brake, do not engage blades at this time, rotate control levers inward. As long as the control levers have not been moved forward or backwards, mower will not move. Slowly move both control levers forward slightly, this will allow mower to start moving forward in a straight line. Pull back on control levers to the neutral position and mower should stop moving. Pull back slightly on control levers, this will allow mower to start moving backwards. Push forward on control levers to the neutral position and mower should stop moving.

To turn to the right

While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn to the left

While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn

While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically. Then by alternating one lever slightly to the forward position and the other in the reverse position.

English-24

Image 25
Contents PZ4822 OPERATOR’S Manual Rider Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Objects Engine is Running Moving sharp blades under cover Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Transport Customer responsibilities Controls ControlsControl Locations Tracking Motion Control LeversFuses Seat adjustment knobsBy pass linkages Refueling Blade switchChoke Control Ignition SwitchThrottle Control Parking Brake Hour MeterMachine must be stopped before activating the parking brake Cutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual  = Not described in this manual To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableBriggs and Stratton engine Replacing the Air FilterReplacing the Fuel Filter Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakeDeck belt Checking the V-beltsDeck belt installation To replace EZT E-Series Zeroturn Transaxle belt EZT beltEZT belt removal Checking the Blades Adjusting the Mower Deck To level deck Side-to-side adjustmentFront-to-back adjustment To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication LubricationLubrication Schedule Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesCaster wheels Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Changing the Oil Filter Checking the oil levelTransmission Trouble Shooting Guide Trouble Shooting GuideProblem Cause Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring diagram Wiring DiagramsTechnical Data Technical DataZ4822 Equipment Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74

PZ4822 specifications

The Poulan PZ4822 is a robust and versatile zero-turn mower designed for homeowners and small-scale landscaping professionals who seek the perfect balance between performance and ease of use. With its impressive features and advanced technology, the PZ4822 makes mowing an efficient and enjoyable task.

One of the standout characteristics of the Poulan PZ4822 is its powerful engine. Equipped with a 22-horsepower Kohler 7000 Series engine, this mower offers reliable performance, enabling it to tackle various terrains with ease. The engine is designed for optimum efficiency, providing ample power for cutting through thick grass and tackling challenging mowing conditions.

The PZ4822 features a 48-inch cutting deck, made of durable steel that ensures long-lasting performance. This size strikes a balance between maneuverability and cutting efficiency, allowing users to navigate tight spaces while still covering a substantial area in a single pass. The cutting deck includes a quick-adjust blade height system, allowing users to effortlessly switch between cutting heights ranging from 1.5 to 4 inches, accommodating different grass lengths and conditions.

One of the key technologies integrated into the PZ4822 is its dual hydrostatic transmission. This system provides smooth and responsive handling, enabling users to make precise turns and navigate obstacles with minimal effort, which is a hallmark of zero-turn mowers. With a top speed of around 6.5 mph, mowing can be completed quickly without sacrificing quality.

The ergonomic design of the Poulan PZ4822 enhances user comfort and convenience. The adjustable high back seat features armrests for more comfortable operation during extended mowing sessions. The intuitive control layout is designed for ease of use, ensuring that even beginners can quickly learn to maneuver the mower with confidence.

Safety features are also integrated into the design of the PZ4822, including an automatic brake system that engages when the operator leaves the seat, ensuring that the mower comes to a halt. Additionally, the mower incorporates a sturdy frame that provides stability even on uneven ground, further enhancing safety during operation.

In summary, the Poulan PZ4822 zero-turn mower is a powerful, user-friendly machine equipped with a dependable engine, a durable cutting deck, and advanced transmission technology. Whether for residential lawns or light commercial work, the PZ4822 is designed to meet the demands of various mowing tasks, making it an excellent choice for those who prioritize efficiency and comfort.