Poulan PZ4822 manual Replacing the Air Filter, Briggs and Stratton engine

Page 41

MAINTENANCE

Replacing the Air Filter

If the engine seems weak or runs unevenly, the air filter may be clogged. If run with a dirty air filter, the spark plug can become fouled. For this reason, it is important to replace the air filter regularly (see the heading Maintenance Schedule for the proper service interval).

Check the air cleaner daily or before starting the engine. Check for build-up of dirt and debris around the air cleaner system.Keep this area clean. Also check for loose or damaged components. Replace all bent damaged air cleaner components.

Cleaning/replacing the air filter is carried out as follows:

Briggs and Stratton engine

The air filter is replaced as follows:

1.Remove the air filter cowling

2.Remove the filter cartridge.

3.Remove the foam filter (pre-cleaner). Clean the foam filter with liquid detergent and water. Squeeze dry in a clean cloth. Saturate with engine oil and squeeze it inside a clean absorbent cloth.

4.Tap the paper filter against a fixed surface to remove dust. If the paper filter is still dirty, it must be replaced.

IMPORTANT INFORMATION

Do not use compressed air to clean the paper filter.

Filters should not be oiled. They should be assembled dry.

5.Wipe clean the inside of air filter housing.

6.Refit the foam filter (pre filter).

7.Mount the filter in the air filter housing.

8.Replace the cowling over the air filter housing.

IMPORTANT INFORMATION

Please see the manual of the engine manufacturer for any additional instructions, including safety instructions

IMPORTANT INFORMATION

Operating the engine with loose damaged air cleaner components could allow unfiltered air into the engine, causing premature wear and failure.

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling.

8019-014

Remove filter

8019-015

Install filter

English-40

Page 40 Page 42
Image 41
Page 40 Page 42
Contents PZ4822 OPERATOR’S Manual Rider Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Symbols and DecalsSymbols and Decals Objects Engine is Running Moving sharp blades under cover General Operation Safety InstructionsSafety Instructions English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Transport Customer responsibilities Control Locations ControlsControls Tracking Motion Control LeversFuses Seat adjustment knobsBy pass linkages Refueling Blade switchThrottle Control Ignition SwitchChoke Control Machine must be stopped before activating the parking brake Hour MeterParking Brake Cutting height pedal AccessoriesTraining OperationOperation Starting the Engine Before StartingDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance = Described in this manual  = Not described in this manual To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableBriggs and Stratton engine Replacing the Air FilterReplacing the Fuel Filter Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakeDeck belt Checking the V-beltsDeck belt installation EZT belt removal EZT beltTo replace EZT E-Series Zeroturn Transaxle belt Checking the Blades Adjusting the Mower Deck To level deck Side-to-side adjustmentFront-to-back adjustment To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication Schedule LubricationLubrication Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesCaster wheels Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Changing the Oil Filter Checking the oil levelTransmission Problem Cause Trouble Shooting GuideTrouble Shooting Guide Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring diagram Wiring DiagramsZ4822 Technical DataTechnical Data Equipment Torque Specifications USA requirements Conformity CertificatesConformity Certificates Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74

PZ4822 specifications

The Poulan PZ4822 is a robust and versatile zero-turn mower designed for homeowners and small-scale landscaping professionals who seek the perfect balance between performance and ease of use. With its impressive features and advanced technology, the PZ4822 makes mowing an efficient and enjoyable task.

One of the standout characteristics of the Poulan PZ4822 is its powerful engine. Equipped with a 22-horsepower Kohler 7000 Series engine, this mower offers reliable performance, enabling it to tackle various terrains with ease. The engine is designed for optimum efficiency, providing ample power for cutting through thick grass and tackling challenging mowing conditions.

The PZ4822 features a 48-inch cutting deck, made of durable steel that ensures long-lasting performance. This size strikes a balance between maneuverability and cutting efficiency, allowing users to navigate tight spaces while still covering a substantial area in a single pass. The cutting deck includes a quick-adjust blade height system, allowing users to effortlessly switch between cutting heights ranging from 1.5 to 4 inches, accommodating different grass lengths and conditions.

One of the key technologies integrated into the PZ4822 is its dual hydrostatic transmission. This system provides smooth and responsive handling, enabling users to make precise turns and navigate obstacles with minimal effort, which is a hallmark of zero-turn mowers. With a top speed of around 6.5 mph, mowing can be completed quickly without sacrificing quality.

The ergonomic design of the Poulan PZ4822 enhances user comfort and convenience. The adjustable high back seat features armrests for more comfortable operation during extended mowing sessions. The intuitive control layout is designed for ease of use, ensuring that even beginners can quickly learn to maneuver the mower with confidence.

Safety features are also integrated into the design of the PZ4822, including an automatic brake system that engages when the operator leaves the seat, ensuring that the mower comes to a halt. Additionally, the mower incorporates a sturdy frame that provides stability even on uneven ground, further enhancing safety during operation.

In summary, the Poulan PZ4822 zero-turn mower is a powerful, user-friendly machine equipped with a dependable engine, a durable cutting deck, and advanced transmission technology. Whether for residential lawns or light commercial work, the PZ4822 is designed to meet the demands of various mowing tasks, making it an excellent choice for those who prioritize efficiency and comfort.
Top Page Image Contents