Poulan B1750 instruction manual Storage

Page 7

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Mounting

Screw

Muffler Cover

Holes

 

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

CARBURETOR ADJUSTMENT

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your engine will not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position

unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy stor-

age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

-- 7 --

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 10/04 Manual de Instrucciones Manuel d’InstructionsHandle Fuel with CAUTION, IT is Highly Flammable Safety RulesKnow Your Unit Plan AheadBlower Tube Assembly AssemblyMaintain Your Unit Properly Operation Starting Position Starting a Cold Engine Before Starting Engine Fueling EngineTo Stop the Engine Before Starting the EngineMaintenance Storage Carbon build up Troubleshooting Table Cause RemedyAdjustment Crankshaft seals worn AdjustmentEPA Emission Control Warranty Statement Limited WarrantyEmission Control Warranty Parts

B1750 specifications

The Poulan B1750 is a versatile and durable blowers that caters to homeowners and landscaping professionals alike. Boasting impressive features, this equipment is designed for efficiency and ease of use, making yard maintenance a more manageable task.

At the heart of the Poulan B1750 is a robust 25cc two-stroke engine. This engine provides ample power to tackle the toughest yard debris, ensuring a clean and tidy outdoor space. The 175 mph air speed and air volume of 450 CFM (cubic feet per minute) allow for dynamic airflow, enabling efficient leaf blowing and debris clearing. This powerful performance is complemented by the blower's lightweight design, weighing in at just 9.5 pounds, making it easy to carry and handle during extended use.

One of the standout features of the B1750 is the ergonomic design. The blower is equipped with a comfortable handle that reduces fatigue, allowing users to work longer without discomfort. Additionally, its adjustable air velocity allows users to tailor the blowing power to their specific needs, whether they are clearing thick leaves or lightly dusting surfaces.

The Poulan B1750 also incorporates a convenient start system, which enhances user experience by simplifying the starting process. This feature is especially beneficial for those who may struggle with traditional pull-start ignition systems, as it ensures a quicker and smoother operation for the user every time.

When it comes to technology, the B1750 shines with its fuel-efficient architecture. The engine is designed to maximize fuel use while minimizing emissions, making this blower an environmentally friendly choice for those who are conscious of their carbon footprint.

In addition to its powerful performance and user-friendly design, the B1750 is constructed with durability in mind. The materials used in its design provide resilience against the wear and tear that comes with regular outdoor use.

In summary, the Poulan B1750 is an exceptional blower, offering a combination of power, efficiency, and ease of use. Its 25cc engine, lightweight construction, ergonomic design, and fuel-efficient technology make it a top choice for both homeowners and professionals seeking reliability and performance in a landscaping tool. Whether tackling seasonal leaf cleanup or maintaining a tidy garden, the Poulan B1750 is equipped to handle the job with ease.
Top Page Image Contents