Before Starting Engine Fueling Engine

SAfter using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or boat oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

NOTE: Unit must be placed on its side when adding fuel (see illustration below).

TO STOP THE ENGINE

DTo stop the engine, move the throttle lever to the STOP position.

BEFORE STARTING THE ENGINE

WARNING: You MUST make sure the tubes are secure before using the unit.

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DHold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

STARTING POSITION

WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area when starting engine or while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through the discharge opening, damaging the unit or property, or causing serious injury to by- standers or the operator.

STARTING A COLD ENGINE

1.Move throttle lever to the position.

2.Move choke lever to the FULL CHOKE position.

3.Slowly press the primer button 8 times.

Throttle Lever

Primer Button

Choke Lever

4.Pull starter rope sharply until engine at- tempts to run, but no more than 5 pulls (be- low 30_ F, 8 pulls).

NOTE: If engine attempts to start before the 5th pull, go to next step immediately.

5.Move the choke lever to the HALF CHOKE position.

6.Pull the starter rope sharply until the en- gine runs, but no more than 5 pulls (below 30_ F, 10 pulls).

7.After a 5 second warm--up, move the choke lever to the RUN position.

8.Allow the unit to run for 30 more seconds at the RUN position before moving the

throttle lever to position.

-- 5 --

B1750 specifications

The Poulan B1750 is a versatile and durable blowers that caters to homeowners and landscaping professionals alike. Boasting impressive features, this equipment is designed for efficiency and ease of use, making yard maintenance a more manageable task.

At the heart of the Poulan B1750 is a robust 25cc two-stroke engine. This engine provides ample power to tackle the toughest yard debris, ensuring a clean and tidy outdoor space. The 175 mph air speed and air volume of 450 CFM (cubic feet per minute) allow for dynamic airflow, enabling efficient leaf blowing and debris clearing. This powerful performance is complemented by the blower's lightweight design, weighing in at just 9.5 pounds, making it easy to carry and handle during extended use.

One of the standout features of the B1750 is the ergonomic design. The blower is equipped with a comfortable handle that reduces fatigue, allowing users to work longer without discomfort. Additionally, its adjustable air velocity allows users to tailor the blowing power to their specific needs, whether they are clearing thick leaves or lightly dusting surfaces.

The Poulan B1750 also incorporates a convenient start system, which enhances user experience by simplifying the starting process. This feature is especially beneficial for those who may struggle with traditional pull-start ignition systems, as it ensures a quicker and smoother operation for the user every time.

When it comes to technology, the B1750 shines with its fuel-efficient architecture. The engine is designed to maximize fuel use while minimizing emissions, making this blower an environmentally friendly choice for those who are conscious of their carbon footprint.

In addition to its powerful performance and user-friendly design, the B1750 is constructed with durability in mind. The materials used in its design provide resilience against the wear and tear that comes with regular outdoor use.

In summary, the Poulan B1750 is an exceptional blower, offering a combination of power, efficiency, and ease of use. Its 25cc engine, lightweight construction, ergonomic design, and fuel-efficient technology make it a top choice for both homeowners and professionals seeking reliability and performance in a landscaping tool. Whether tackling seasonal leaf cleanup or maintaining a tidy garden, the Poulan B1750 is equipped to handle the job with ease.