Poulan PP4620AVHD Adjusting the tension, Tip Bar, Cutters, Recheck chain tension

Page 7

Inside view of

Chain Brake

Adjustment located on Chain Brake

4.Turn the adjusting screw by hand counter- clockwise until the adjusting pin just touches the stop. This should allow the pin to be near the correct position. Further ad- justment may be necessary as you mount the bar.

5.Slide guide bar behind clutch drum until guide bar stops against clutch drum sprocket.

Mount the bar

6.Prepare the chain by checking the proper direction. Without following the illustration it is easy to place the chain on the saw in the wrong direction. Use the illustration of the chain to determine the proper direction.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

7.Place the chain over and behind the clutch, fitting the drive links in the clutch drum sprocket.

Place chain onto the sprocket

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links in bar groove.

10.Pull the bar forward until the chain is snug in the guide bar groove. Ensure all drive links are in the bar groove.

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tighten only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting screw

Chain Brake Nuts

Adjusting Screw -- 1/4 Turn

S Lift up the tip of the bar and tighten the chain brake nuts securely with the bar tool.

SRecheck chain tension.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PP4620AVHD Plan Ahead Starting ReminderKickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionYour left arm straight with the elbow locked Maintain ControlReduce the Chance of Kickback Do not cut more than one log at a timeChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyComputed kickback angle CKA Table Attaching the Bumper SpikeCutters Adjusting the tensionInside view Chain Brake Adjustment located on Chain Brake Tip BarOperation BAR and Chain Lubrication Fueling & LubricationStarting Fueling EngineImportant Points Cutting MethodsStarting a Warm Engine Chain BrakeFelling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Bucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingErly Limbing and Pruning Important PointsLimbing PruningAIR Filter ServiceCleaning the air filter Cleaning the Spark Arresting ScreenStorage Trouble Cause Remedy Troubleshooting TableNeed Service PART? Need ASSISTANCE?Ligations The U. S. Environmental Limited WarrantyElectrolux Home PRODUCTS, INC NANCE, Replacement and Repair of Emission Related Parts Any

PP4620AVHD specifications

The Poulan PP4620AVHD is a robust chainsaw engineered for homeowners and occasional users seeking a blend of performance, efficiency, and ease of use. This model is particularly well-suited for tackling medium to heavy-duty cutting tasks, such as tree trimming, firewood cutting, and storm cleanup.

One of the standout features of the PP4620AVHD is its powerful 46cc, 2-cycle engine. This engine delivers a strong performance and ensures efficient cutting through a variety of materials. With a top speed of approximately 9,000 RPM, users can expect swift cuts, making short work of logs and branches.

The ease of starting is a crucial aspect of the PP4620AVHD. It incorporates an advanced starting system with a spring-assist mechanism, reducing the effort needed to start the chainsaw. This feature is particularly appreciated during cold starts, allowing the user to spend less time struggling and more time cutting.

The chainsaw is equipped with an 18-inch bar and chain which strikes a balance between maneuverability and cutting capacity. This size is ideal for tackling larger logs while still being manageable for less experienced users. The chain is designed for quick and easy adjustments, ensuring that the user can maintain optimal tension without the need for additional tools.

Safety is a priority in any power tool, and the PP4620AVHD includes multiple safety features. It has a front hand guard to protect the user's hands from flying debris, and a chain brake that engages automatically during kickback situations. These features help ensure a safer cutting experience.

An additional characteristic of the PP4620AVHD is its AV technology (Anti-Vibration). This reduces vibrations felt by the user, which is crucial for extended use, minimizing fatigue and promoting comfort during operation.

For maintenance, the chainsaw has an easy-access air filter and fuel cap, allowing for straightforward cleaning and refueling. Regular maintenance is vital to prolong the life of any chainsaw, and Poulan's design supports user-friendliness in this regard.

The Poulan PP4620AVHD stands out as a capable and versatile chainsaw, perfect for those who need reliable performance without the complexity of professional-grade equipment. It combines power, safety, and comfort, making it a smart choice for both novice and seasoned users looking for an effective cutting tool.
Top Page Image Contents