Poulan PBV200 LE Blower Tube Assembly, Vacuum BAG Assembly, Vacuum Tube Assembly

Page 5

ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled and all fasteners are secure. Follow all safety information in the manual and on the unit.

DA standard screwdriver is required for as- sembly.

BLOWER TUBE ASSEMBLY

1.Align the rib on the blower tube with the groove in the blower outlet; slide the tube into place.

NOTE: Knob must be loose enough to allow blower tube to be inserted in blower outlet. Loosen knob by turning counterclockwise.

Blower

Outlet Blower

Tube

Groove Rib

2.Secure the tube by turning the knob clock- wise.

3.To remove the tube, turn the knob counter- clockwise to loosen the tube; remove the tube.

VACUUM BAG ASSEMBLY

1.Open the zipper on the vacuum bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

Elbow

TubeSmall

Opening

Zipper

OpeningRib

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube, and the rib on the elbow tube is on the bottom.

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Remove blower tube from engine.

Rib

Groove

5.Insert the elbow tube into the blower outlet. Make sure elbow tube rib is aligned with the blower outlet groove.

6.Turn knob clockwise to secure elbow tube.

VACUUM TUBE ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury.

1.Align the lower vacuum tube as shown. Push lower vacuum tube into upper vacu- um tube.

Upper Vacuum

Tube

Lower Vacuum Tube

2.Insert the tip of a screwdriver into the latch area of the vacuum inlet.

Latch

Blower

Outlet

Area

 

Latch Area

 

Vacuum

 

Inlet Cover

3.Gently tilt the handle of the screwdriver to- ward the back of the unit to release the latch while pulling up on the vacuum inlet cover with your other hand.

4.Hold the vacuum inlet cover open until up- per vacuum tube is installed.

Vacuum Inlet

Retaining Post

Vacuum

Inlet

Cover

-- 5 --

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Know Your Unit Safety RulesPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableMaintain Your Unit Properly Operate Your Unit SafelyBefore starting engine Store in a dry area out of reach of childrenBlower Tube Assembly AssemblyVacuum BAG Assembly Vacuum Tube AssemblyHook Retaining Post HOW to Convert Unit from Vacuum USE to Blower USEShoulder Strap Adjustment Operation To Stop the Engine Before Starting Engine Fueling EngineBefore Starting the Engine Blower VacuumMaintenance Storage Fuel System Troubleshooting Table Cause RemedyEngine OtherEPA/CALIFORNIA Emission Control Warranty Statement Limited WarrantyIntermediate 125 hours Extended 300 hours

PBV200 LE specifications

The Poulan PBV200 LE is a powerful and versatile leaf blower designed for homeowners and professionals alike, making outdoor maintenance tasks more efficient and hassle-free. With its robust engine and thoughtful design, this blower stands out in a crowded market, appealing to those looking for both performance and ease of use.

One of the key features of the PBV200 LE is its 200cc engine, delivering an impressive airflow speed of up to 200 mph. This robust engine not only provides strong suction and blowing performance, but it also ensures a quicker clean-up of leaves, grass clippings, and other debris, making yard work a breeze. The engine is designed with a focus on fuel efficiency, allowing users to work for extended periods without frequent refueling.

In terms of ergonomics, the PBV200 LE showcases a lightweight design, making it easy to maneuver around the yard. Weighing in at just 11.5 pounds, it minimizes user fatigue during extended use. The blower also features an adjustable handle and padded straps, allowing for a customized fit that ensures comfort and stability, even during long durations of operation.

The technology incorporated into the PBV200 LE enhances its usability. An easy-start system enables quick ignition, while the low-vibration function reduces user fatigue and increases control, allowing for precise maneuvering. Additionally, the blower features a vacuum and mulching function, which allows for dual-use applications. This versatility not only saves time but also promotes efficient yard waste management by shredding leaves into mulch.

Not to be overlooked is the PBV200 LE's environmentally friendly design. It meets or exceeds EPA emissions standards, providing peace of mind to users who are conscious of their environmental footprint. This commitment to sustainability without sacrificing performance makes it an ideal choice for eco-conscious homeowners.

With its combination of power, comfort, and eco-friendly design, the Poulan PBV200 LE is a reliable leaf blower that meets the demands of outdoor cleaning tasks. Whether tackling seasonal leaf fall or maintaining garden spaces, this model delivers exceptional performance and convenience that enhances any landscaping strategy.
Top Page Image Contents