Maintenance

STARTING A COLD ENGINE

1.Move throttle lever to the position.

2.Move choke lever to the FULL CHOKE position.

3.Slowly press the primer button 8 times.

Throttle Lever

Primer Button

Choke Lever

4.Pull starter rope sharply until engine at- tempts to run, but no more than 5 pulls (be- low 30_ F, 8 pulls).

NOTE: If engine attempts to start before the 5th pull, go to next step immediately.

5.Move the choke lever to the HALF CHOKE position.

6.Pull the starter rope sharply until the en- gine runs, but no more than 5 pulls (below 30_ F, 10 pulls).

7.After a 5 second warm--up, move the choke lever to the RUN position.

8.Allow the unit to run for 30 more seconds at the RUN position before moving the

throttle lever to the position.

If engine has not started after 5 pulls (at HALF CHOKE), repeat STARTING A COLD ENGINE procedure. If engine still does not start, proceed to STARTING A FLOODED ENGINE.

9.To stop the engine, move the throttle lever to the STOP position.

STARTING A WARM ENGINE NOTE: If fuel tank is empty, add fuel; then, follow STARTING A COLD ENGINE proce- dure. Do not fill fuel tank while engine is hot.

1.Move throttle lever to the position.

2.Pull starter rope sharply until engine runs, but no more than 5 pulls.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

3.To stop the engine, move the throttle lever to the STOP position.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position. Move throttle

lever to the fast position ; then, pull rope until engine starts. After engine starts, move the

throttle lever to the slow position	to allow
engine to idle.

Starting could require pulling the starter rope many times depending on how badly the unit is flooded.

If unit still doesn’t start refer to the TROUBLE- SHOOTING TABLE or call 1-800-554-6723.

WARNING: Avoid touching muffler unless engine and muffler are cold. A hot muffler can cause serious burns.

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws S Muffler

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SFuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

SVacuum Bag -- Do not use vacuum bag if it is torn or damaged.

INSPECT AND CLEAN UNIT AND DECALS

SAfter each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

-- 9 --

PBV200 LE specifications

The Poulan PBV200 LE is a powerful and versatile leaf blower designed for homeowners and professionals alike, making outdoor maintenance tasks more efficient and hassle-free. With its robust engine and thoughtful design, this blower stands out in a crowded market, appealing to those looking for both performance and ease of use.

One of the key features of the PBV200 LE is its 200cc engine, delivering an impressive airflow speed of up to 200 mph. This robust engine not only provides strong suction and blowing performance, but it also ensures a quicker clean-up of leaves, grass clippings, and other debris, making yard work a breeze. The engine is designed with a focus on fuel efficiency, allowing users to work for extended periods without frequent refueling.

In terms of ergonomics, the PBV200 LE showcases a lightweight design, making it easy to maneuver around the yard. Weighing in at just 11.5 pounds, it minimizes user fatigue during extended use. The blower also features an adjustable handle and padded straps, allowing for a customized fit that ensures comfort and stability, even during long durations of operation.

The technology incorporated into the PBV200 LE enhances its usability. An easy-start system enables quick ignition, while the low-vibration function reduces user fatigue and increases control, allowing for precise maneuvering. Additionally, the blower features a vacuum and mulching function, which allows for dual-use applications. This versatility not only saves time but also promotes efficient yard waste management by shredding leaves into mulch.

Not to be overlooked is the PBV200 LE's environmentally friendly design. It meets or exceeds EPA emissions standards, providing peace of mind to users who are conscious of their environmental footprint. This commitment to sustainability without sacrificing performance makes it an ideal choice for eco-conscious homeowners.

With its combination of power, comfort, and eco-friendly design, the Poulan PBV200 LE is a reliable leaf blower that meets the demands of outdoor cleaning tasks. Whether tackling seasonal leaf fall or maintaining garden spaces, this model delivers exceptional performance and convenience that enhances any landscaping strategy.