Before Starting Engine Fueling Engine, Safely

S To reduce noise levels, operate power blowers at the lowest possible throttle speed to do the job.

SUse rakes and brooms to loosen debris be-

fore blowing.

S In dusty conditions, slightly dampen sur- faces or use a mister attachment when wa- ter is available.

S Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

SWatch out for children, pets, open windows, or freshly washed cars. Blow debris away

safely.

SUse the full blower nozzle extension so the air stream can work close to the ground.

SAfter using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan PRO brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or marine oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

HOW TO STOP YOUR ENGINE

DRelease the throttle trigger.

S Push and hold the STOP switch in the STOP position until the engine stops.

HOW TO START YOUR ENGINE

WARNING: You MUST make sure the tubes are secure before using the unit.

DFuel engine. Move at least 10 feet (3 me-

ters) away from the fueling site.

DHold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

STARTING POSITION

Blower

Vacuum

WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area when starting engine or while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through the discharge opening, damaging the unit or property, or causing serious injury to by- standers or the operator.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or warm engine after running out of fuel)

1.Slowly press the primer bulb 6 times.

2.Move choke lever to the FULL CHOKE posi- tion.

3.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

Choke

Lever

Primer

Bulb

-- 8 --

545146905, PPB430VS specifications

The Poulan PPB430VS is a versatile and powerful blower designed for both professional landscapers and homeowners who require an efficient tool for yard maintenance. This model, part of Poulan's line of outdoor power equipment, stands out due to its robust build, exceptional performance, and user-friendly design.

One of the main features of the PPB430VS is its 43cc two-stroke engine, which provides ample power for a variety of tasks, from clearing yard debris to tidying up driveways and sidewalks. The engine's design ensures that it operates at optimal efficiency while delivering reliable performance. It also utilizes a primer bulb for easy starting, which minimizes the hassle of getting the blower up and running, especially after prolonged periods of inactivity.

Equipped with a variable speed throttle, the PPB430VS allows users to control airflow, making it an extremely adaptable tool for different blowing tasks. Whether you need to blow away light leaves or heavier debris, the adjustable speed settings ensure you can handle any job efficiently. The unit's air volume rating and air speed reach impressive levels, making it suitable for both light-duty and heavier cleanup jobs.

Comfort and ease of use are paramount in the design of the PPB430VS. It features an ergonomic handle that reduces operator fatigue during extended use, allowing for longer work periods without discomfort. The lightweight design of the blower also contributes to its usability; at just over 9 pounds, it is easy to maneuver without sacrificing power.

For added convenience, the PPB430VS includes a low-noise operation feature, which is particularly beneficial in residential areas where noise restrictions may apply. This design consideration demonstrates Poulan's commitment to providing equipment that respects the environment and the preferences of its users.

Additional characteristics of the PPB430VS include a durable housing that protects the internal components from wear and tear, ensuring longevity. The efficient fuel system contributes to a lower emissions output, making it a more environmentally friendly option compared to older models.

Overall, the Poulan PPB430VS is a reliable and powerful blower that combines ease of use with advanced technology, making it an ideal choice for anyone looking to maintain their outdoor spaces with minimal effort and maximum efficiency.