Poulan 545146905 Blower Tube Assembly, HIGH-SPEED Nozzle Assembly, Vacuum BAG Assembly

Page 5

ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled and all fasteners are secure. Follow all safety information in the manual and on the unit.

DA standard screwdriver is required for as- sembly.

BLOWER TUBE ASSEMBLY

1.Align the slots on the lower blower tube with the tabs on the upper blower tube.

Upper Blower Tube

HIGH-SPEED NOZZLE ASSEMBLY

When greater air speed is desired, use the high--speed nozzle.

1.Align the slots on the nozzle with the tabs on the lower blower tube.

High--Speed

Nozzle

Lower Blower

Tab

 

Tube

Slot

 

2.Slide the nozzle onto the lower blower tube.

3.Turn the nozzle clockwise until a click is felt to secure the nozzle to the lower blow- er tube.

VACUUM BAG ASSEMBLY

1.Open the zipper on the vacuum bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

ElbowRib

Tab

Lower Blower Tube

Slot

Tube

2.Slide the lower blower tube onto the upper blower tube.

3.Turn the lower blower tube clockwise until a click is felt to secure the lower blower tube to the upper blower tube.

NOTE: When the upper and lower blower tubes are assembled together properly, the arrows on both tubes will be aligned.

4.Align the rib on the upper blower tube with the groove in the blower outlet; slide the tube into place.

NOTE: Knob must be loose enough to allow blower tubes to be inserted in blower outlet. Loosen knob by turning counterclockwise.

Blower Outlet

Rib

Groove

5.Secure the tubes by turning the knob clockwise.

6.To remove the tubes, turn the knob coun- terclockwise to loosen the tubes; remove the tubes.

Zipper Opening

Small Opening

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube, and the rib on the elbow tube is on the bottom.

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Remove blower tubes from engine.

Rib

Groove

5.Insert the elbow tube into the blower outlet. Make sure elbow tube rib is aligned with the blower outlet groove.

6.Turn knob clockwise to secure elbow tube.

VACUUM TUBE ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury.

-- 5 --

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Know Your Unit Safety RulesPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableMaintain Your Unit Properly Blower Tube Assembly AssemblyHIGH-SPEED Nozzle Assembly Vacuum BAG AssemblyOutlet Latch Area Vacuum Inlet Cover HOW to Convert Unit from Vacuum USE to Blower USEShoulder Strap Adjustment Operation HOW to Start Your Engine HOW to Stop Your EngineBefore Starting Engine Fueling Engine SafelyMaintenance Replace Fuel Filter Replace Spark PlugCheck Muffler Mounting Screws Inspect Muffler and Spark Arresting ScreenStorage Adjustment Crankshaft seals worn Troubleshooting Table Cause RemedyAdjustment Carbon build upCanada, contact Limited WarrantyEred Repair or Replacement

545146905, PPB430VS specifications

The Poulan PPB430VS is a versatile and powerful blower designed for both professional landscapers and homeowners who require an efficient tool for yard maintenance. This model, part of Poulan's line of outdoor power equipment, stands out due to its robust build, exceptional performance, and user-friendly design.

One of the main features of the PPB430VS is its 43cc two-stroke engine, which provides ample power for a variety of tasks, from clearing yard debris to tidying up driveways and sidewalks. The engine's design ensures that it operates at optimal efficiency while delivering reliable performance. It also utilizes a primer bulb for easy starting, which minimizes the hassle of getting the blower up and running, especially after prolonged periods of inactivity.

Equipped with a variable speed throttle, the PPB430VS allows users to control airflow, making it an extremely adaptable tool for different blowing tasks. Whether you need to blow away light leaves or heavier debris, the adjustable speed settings ensure you can handle any job efficiently. The unit's air volume rating and air speed reach impressive levels, making it suitable for both light-duty and heavier cleanup jobs.

Comfort and ease of use are paramount in the design of the PPB430VS. It features an ergonomic handle that reduces operator fatigue during extended use, allowing for longer work periods without discomfort. The lightweight design of the blower also contributes to its usability; at just over 9 pounds, it is easy to maneuver without sacrificing power.

For added convenience, the PPB430VS includes a low-noise operation feature, which is particularly beneficial in residential areas where noise restrictions may apply. This design consideration demonstrates Poulan's commitment to providing equipment that respects the environment and the preferences of its users.

Additional characteristics of the PPB430VS include a durable housing that protects the internal components from wear and tear, ensuring longevity. The efficient fuel system contributes to a lower emissions output, making it a more environmentally friendly option compared to older models.

Overall, the Poulan PPB430VS is a reliable and powerful blower that combines ease of use with advanced technology, making it an ideal choice for anyone looking to maintain their outdoor spaces with minimal effort and maximum efficiency.
Top Page Image Contents