MAINTENANCE
Replacing the Fuel Filter
Replace the
Replace the filter as follows:
1.Move the hose clamps away from the
filter. Use
2.Pull the filter loose from the hose ends.
3. Push the new filter into the hose ends. Position the filter with the ”FLOW” arrow
pointing up toward the carburetor. IfFuel filter necessary, a soap solution can be
applied to the filter ends to ease mounting.
4.Move the hose clamps back toward the filter.
Checking Tire Pressures
All four tires should have a pressure of 15 psi / 103 kPa /1 bar.
IMPORTANT INFORMATION
Different ire pressures on the front tires will result in the blades cutting the grass at different height.
Checking the Parking Brake
Visually check that no damage is found on the lever, linages, or switch belonging to the parking brake. Perform a stand still test and check that there is a braking action.
To adjust the parking brake, contact the Poulan service workshop.
WARNING!
Faulty adjustment can result in reduced braking ability causing an accident.
Tire pressures
IMPORTANT INFORMATION
The parking brake is a mechanical latch brake and must not be applied when the mower is moving. The machine must be absolutely standing still when the parking brake is applied.