HOW to Remove AN Object from the AIR Intake

HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE

WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

1.While holding the inlet cover open, remove the vacuum tubes. The inlet cover must be held open through all remaining steps.

2.Carefully reach into the vacuum opening and clear out the air intake area. Clear all debris from impeller.

3.Inspect the impeller for cracks. If cracked or damaged, do not use the unit. Have parts replaced by your au- thorized service dealer. Do not at- tempt to replace them yourself.

WARNING: Perform the following steps after each use:

SStop unit and disconnect from the pow- er source.

S Allow motor to cool before storing or transporting.

SStore unit with all guards in place. Posi-

tion unit so that any sharp object cannot accidentally cause injury.

S Store unit unplugged, well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at the end of the season or if it will not be used for 30 days or more.

If your blower is to be stored for a period of time:

SStop unit and disconnect from the pow-

er source.

SClean the entire unit before lengthy stor-

age.

S Open inlet cover and clean any dirt, grass, or debris that has collected. In- spect the blower and all tubes. Close and make sure the cover is latched.

SClean air vents and air inlet of debris. S Store your unit and extension cord in a well ventilated area and covered, if pos- sible, to prevent dust and dirt accumula- tion. Do not cover with plastic. Plastic cannot breathe and may cause con- densation and eventual rust or corro-

sion.

S Check entire unit for loose screws. Re- place any damaged, worn, or broken parts.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that re- quire unit to be operating.

SYMPTOM	CAUSE			REMEDY
Unit fails to	1.	Switch in the OFF position.	1.	Slide switch to ON position.
operate.	2.	Extension cord discon--	2.	Reconnect extension cord.
		nected.	3.	Reset circuit breaker or
	3.	Circuit breaker tripped, or	3.	Reset circuit breaker or
		fuse blown.		fuse.
	4.	Mechanical failure	4.	Contact your authorized
				service dealer.
Unit	1. Mechanical failure		1. Contact your authorized
vibrates				service dealer.
abnormally.
Impeller will	1. Debris in air intake area.		1. Clean unit. Remove any
not turn	2. Mechanical failure.			debris.
freely.			2. Contact your authorized
				service dealer.

EBVM 215 specifications

The Poulan EBVM 215 is a highly functional and versatile leaf blower designed for homeowners and landscaping professionals alike. This equipment is known for its exceptional performance, ease of use, and a variety of features that cater to different outdoor cleaning needs. It stands out in the market due to its thoughtful engineering and reliable performance.

One of the key features of the Poulan EBVM 215 is its powerful 25cc 2-cycle engine. This engine provides ample power to tackle even the most stubborn piles of leaves and debris while maintaining a manageable weight for the user. With its lightweight design, the blower allows for extended use without causing excessive fatigue, making it perfect for prolonged yard work or commercial landscaping tasks.

The Poulan EBVM 215 is equipped with a variable speed throttle, allowing users to easily adjust the blower speed according to their specific needs. This feature provides greater control when clearing out stubborn debris or maintaining delicate flower beds, ensuring that users have the versatility they require for any job.

In addition, the blower includes a unique vacuum feature that allows users to transition from blowing leaves to vacuuming them up with minimal effort. This dual functionality enhances its usability and makes it an excellent choice for those who want an all-in-one solution for yard maintenance.

Another highlight of the Poulan EBVM 215 is its ergonomic design. Featuring a comfortable handle with a cushioned grip, the blower is engineered for user comfort without compromising control. This ergonomic setup allows for better handling and maneuverability, which is crucial when working in tight spaces or navigating around garden beds.

The Poulan EBVM 215 also emphasizes ease of maintenance with its simple assembly and straightforward maintenance procedures. This user-friendly approach ensures that both novice and experienced users can keep their equipment in top condition with minimal hassle.

In terms of noise reduction, the blower has been designed with a lower emission engine, which not only complies with environmental regulations but also helps reduce the noise typically associated with gas-powered blowers. This feature is particularly beneficial for residential areas where noise control is appreciated.

Overall, the Poulan EBVM 215 combines power, versatility, and user-centered design, making it a strong contender in the home and garden tool market. Its innovative features and reliable performance genuinely elevate the standard for leaf blowers, positioning it as a valuable addition to any outdoor maintenance arsenal.