Poulan PRGT22H50D owner manual Tractor

Page 17

CUSTOMER RESPONSIBILITIES

TRACTOR

Always observe safety rules when performing any mainte- nance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 13)

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING EDGE UP

STAR

BLADE

CENTER

 

 

HOLE

FLAT WASHER

MANDREL

ASSEMBLY

 

HEX BOLT

 

(GRADE 8)*

 

LOCK

WASHER

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 13

TO SHARPEN BLADE (See Fig. 14)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and even- tual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

 

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 14

BATTERY

Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model PRGT22H50DSafe Operation Practices for Ride-On Mowers IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Tools Required for Assembly AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonAssemble Gauge Wheels and Brackets to Mower Deck See Fig Install Seat See FigTo Attach Nose Roller See Fig Install Mower and Drive Belt See FigsCheck for Proper Position of ALL Belts Check Tire PressureCheck Mower Levelness Operation Know Your Tractor Height Adjustment Knob Used to adjust the mower heightHOW to USE Your Tractor To Operate Mower See Figs To Adjust Gauge Wheels See FigTo Operate on Hills To Transport See FigsCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsCustomer Responsibilities Lubrication Chart ¡General Recommendations Before Each USETractor Engine Muffler CleaningSpark Plugs Engine OIL FilterTo Install Mower Service and AdjustmentsTo Level Mower Housing To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig To Replace Mower Drive BeltTo Replace Motion Drive Belt See Fig To Adjust Attachment Clutch See FigTransmission REMOVAL/REPLACEMENT Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment Front Wheel TOE-IN AdjustmentTo Remove Wheel for Repairs To Start Engine with a Weak Battery See FigReplacing Battery See Fig To Remove Hood and Grill Assembly See Fig To Adjust Attachment Lift Spring See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig Fuel System OtherEngine OIL CylindersProblem Cause Correction Troubleshooting PointsOFF Service Notes Tractor - Model Number PRGT22H50D SchematicElectrical KEY Part Description Chassis and Enclosures Repair Parts 149 Ground Drive153 4497H Steering Assembly Adapter, Wheel Steering Spark Arrester KIT EngineScrew Hex Hd Cap 5/16-18 x 3/4 Seat Assembly Lift Assembly Mower Deck Washer, Hard Blade Mower Vented Wheels & Tires DecalsService Notes Service Notes Service Notes Limited Warranty This OUT Dotted Lines Slope CUTParts and Service

PRGT22H50D specifications

The Poulan PRGT22H50D is a standout in the realm of outdoor power equipment, specifically designed for homeowners seeking a reliable and efficient lawn tractor. Renowned for its robust features and user-friendly design, the PRGT22H50D delivers exceptional performance for lawn care enthusiasts.

One of the key features of this lawn tractor is its powerful 22-horsepower engine, providing ample horsepower to tackle even the toughest grass. This engine is engineered for durability and efficiency, allowing users to cover more ground at an impressive speed. The tractor is equipped with a 50-inch cutting deck, offering a wide cutting path that reduces the time spent mowing. The cutting deck design allows for superior grass dispersion, leaving a well-manicured lawn in its wake.

The PRGT22H50D incorporates a hydrostatic transmission, which provides a smooth and effortless driving experience. This type of transmission allows for seamless speed changes without the need for gear shifting, making it user-friendly for operators of all experience levels. The intuitive controls are strategically placed, allowing for easy maneuverability around obstacles, ensuring that every inch of grass is trimmed with precision.

Comfort is at the forefront of the design, featuring an adjustable high-back seat that promotes better posture and reduces fatigue during longer mowing sessions. Additionally, the lawn tractor includes a steering wheel that is ergonomically designed for ease of use, enhancing the overall comfort of the operator.

Another notable technology in the Poulan PRGT22H50D is its cutting height adjustment feature, which allows users to customize the height of their cut with ease. This versatility ensures that homeowners can achieve the ideal grass length for their specific lawn needs.

Safety features are also integrated into the design, with a built-in safety switch that helps prevent accidental starts when the operator is not in the seat. This attention to safety reflects Poulan’s commitment to ensuring a secure mowing experience.

Overall, the Poulan PRGT22H50D is an impressive lawn tractor that marries power, comfort, and cutting-edge technology, making it an ideal choice for any homeowner looking to maintain their lawn efficiently and effectively. Whether for small yards or larger properties, this tractor promises to deliver a reliable performance that meets the demands of modern lawn care.
Top Page Image Contents