Poulan PP3816AV, PP4218AV, PP4218AVL instruction manual Other, Load Adjustment Engine

Page 17

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the starter rope 8 to 10 times to distrib- ute oil.

SReplace spark plug with new one of rec- ommended type and heat range.

SClean air filter.

SCheck entire unit for loose screws, nuts,

and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

S Replace your gasoline can if it starts to rust.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

Engine will not

1. Ignition switch off.

1.

Move ignition switch to ON.

start or will run

2. Engine flooded.

2.

See “Difficult Starting” in

only a few

 

 

 

Operation Section.

seconds after

3. Fuel tank empty.

3.

Fill tank with correct fuel mixture.

starting.

4. Spark plug not firing.

4.

Install new spark plug.

 

5. Fuel not reaching

5.

Check for dirty fuel filter; replace.

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

repair or replace.

 

 

 

 

 

Engine will

1.

Idle speed requires

1. See “Carburetor Adjustment” in the

not idle

 

adjustment.

 

Service and Adjustments Section.

properly.

2.

Carburetor requires

2. Contact an authorized service dealer.

 

 

adjustment.

 

 

 

Engine will not

1.

Air filter dirty.

1. Clean or replace air filter.

accelerate,

2.

Spark plug fouled.

2. Clean or replace plug and regap.

lacks power,

3.

Chain brake engaged.

3. Disengage chain brake.

or dies under

4.

Carburetor requires

4. Contact an authorized service dealer.

a load.

 

adjustment.

 

 

 

 

 

 

 

 

 

Engine

1.

Too much oil mixed with

1.

Empty fuel tank and refill with

smokes

 

gasoline.

 

correct fuel mixture.

excessively.

 

 

 

 

 

Chain moves

1. Idle speed requires

1. See “Carburetor Adjustment” in the

at idle speed.

 

adjustment.

 

Service and Adjustments Section.

 

2. Clutch requires repair.

2.

Contact an authorized service dealer.

17

Image 17
Contents 545137234 11/30/06 Manual de Instrucciones Manuel d’InstructionsAlways use two hands when operating the chain saw Using the chain sawStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlIf your hand slips off the front handlebar Kickback Safety FeaturesChain Brake and CKA Angle Attaching the BAR & Chain If not AssemblyAdjusting Screw Tensioning Rack Checking the tension Adjusting the tensionChain Tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Cation Always stop the engine before removing the oil capDifficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Operating TipsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingPruning Limbing and Pruning Important PointsLimbing Service Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withLigations The U.S. Environmental Limited Warranty

PP3816AV, PP4218AV, PP4218AVL specifications

The Poulan brand has established itself as a reliable name in the realm of outdoor power equipment, with a solid reputation for producing efficient and durable chainsaws. Among its notable models are the Poulan PP3816AV, PP4218AV, and PP4218AVL, each designed to cater to diverse cutting needs while incorporating advanced technologies and features to enhance user experience.

The Poulan PP3816AV model is compact and lightweight, making it ideal for both novices and seasoned users. It features a powerful 38cc two-stroke engine that provides ample cutting power for small to medium-sized trees, as well as for trimming branches. The 16-inch bar and chain allow for precise cuts, while the patented AV (Anti-Vibration) technology minimizes user fatigue during extended use. Additionally, the easy-access chain tensioning system simplifies adjustments, ensuring optimal chain performance.

Progressing to the PP4218AV, this model offers increased power with its 42cc engine, making it suitable for larger cutting tasks and demanding environments. It retains the 18-inch bar and chain, providing extended reach for tackling higher branches and thicker logs. The anti-vibration system is also present in this model, enhancing comfort during operation. Furthermore, the PP4218AV includes an Easy Start technology that reduces resistance and makes starting the engine effortless, even after long periods of inactivity.

The Poulan PP4218AVL takes things a step further with its enhanced features and capabilities. This model combines the power of a 42cc engine with advanced air filtration, ensuring maximum engine life and optimal performance in dusty environments. The 18-inch Oregon bar and chain guarantee smooth and efficient cuts, while the automatic oiler system keeps the chain adequately lubricated, reducing wear and enhancing durability. The lightweight design and improved anti-vibration system ensure that users can handle this chainsaw for extended periods without discomfort.

In summary, the Poulan PP3816AV, PP4218AV, and PP4218AVL chainsaws embody a blend of power, efficiency, and user-friendliness. With their respective engine sizes and bar lengths, they cater to a range of cutting requirements, from light pruning to more heavy-duty tasks. Each model embraces advanced technologies, such as anti-vibration systems and easy start features, making them excellent choices for both landscaping enthusiasts and professionals alike. With Poulan’s commitment to quality and innovation, users can depend on these chainsaws to get the job done reliably and efficiently.