Poulan PP3816AV, PP4218AV, PP4218AVL instruction manual Assembly, Attaching the BAR & Chain If not

Page 6

Computed kickback angle (CKA) Table

 

BAR

 

CHAIN P/N

CKA without chain brake

MODEL

P/N

 

Length

PP3816AV

952044942

 

16″

952051211

33_

PP4218AV / PP4218AVL

952044926

 

18″

952051338

33_

NOTE: If this saw is to be used for com- mercial logging, a chain brake is required and shall not be removed or otherwise dis- abled to comply with Federal OSHA Regula- tions for Commercial Logging.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and

4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen. Failure to follow all Safety Rules and Precautions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., in accordance with: ANSI B175.1-2000American National Standards for Gasoline--Powered Chain Saws -- Safety Requirements

CSA Z62.1-03Chain Saws -- Occupational Health and Safety

CSA Z62.3-96Chain Saw Kickback Occu- pational Health and Safety

ASSEMBLY

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is properly assembled and all fasteners are secure. Al- ways wear gloves when handling the chain. The chain is sharp and can cut you even when it is not moving!

1.Loosen and remove the bar nuts and the clutch cover from the saw.

2.Remove the plastic shipping spacer (if present).

3.Turn adjusting screw on bar counterclock- wise to move the tensioning rack as far as it will go toward the front of the bar.

Adjusting

Screw

Tensioning Rack

4.Slide guide bar on bar bolts until guide bar stops against clutch drum sprocket.

Clutch cover

 

 

Bar nuts

Location of

Bar bolts

 

shipping

 

spacer

 

Chain adjustment tool

 

Guide bar

(Bar Tool)

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions 545137234 11/30/06Starting Reminder Using the chain sawAlways use two hands when operating the chain saw Plan AheadHandle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackMaintain Control Reduce the Chance of KickbackKickback Safety Features Chain Brake and CKA AngleIf your hand slips off the front handlebar Assembly Adjusting Screw Tensioning RackAttaching the BAR & Chain If not Adjusting the tension Chain TensionChecking the tension Operation Important Points to Remember Before Starting Engine Fueling EngineBAR and Chain Lubrication Cation Always stop the engine before removing the oil capBraking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlFelling Large Trees Operating TipsTree Felling Techniques Notch CUT and Felling the TreeImportant Points Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingLimbing and Pruning Important Points LimbingPruning Service Cleaning the Spark ARREST- ING Screen Inspect and Clean Unit and DecalsClean AIR Filter Check Fuel Mixture LevelStorage Other Load Adjustment EngineEngine Empty fuel tank and refill withLimited Warranty Ligations The U.S. Environmental

PP3816AV, PP4218AV, PP4218AVL specifications

The Poulan brand has established itself as a reliable name in the realm of outdoor power equipment, with a solid reputation for producing efficient and durable chainsaws. Among its notable models are the Poulan PP3816AV, PP4218AV, and PP4218AVL, each designed to cater to diverse cutting needs while incorporating advanced technologies and features to enhance user experience.

The Poulan PP3816AV model is compact and lightweight, making it ideal for both novices and seasoned users. It features a powerful 38cc two-stroke engine that provides ample cutting power for small to medium-sized trees, as well as for trimming branches. The 16-inch bar and chain allow for precise cuts, while the patented AV (Anti-Vibration) technology minimizes user fatigue during extended use. Additionally, the easy-access chain tensioning system simplifies adjustments, ensuring optimal chain performance.

Progressing to the PP4218AV, this model offers increased power with its 42cc engine, making it suitable for larger cutting tasks and demanding environments. It retains the 18-inch bar and chain, providing extended reach for tackling higher branches and thicker logs. The anti-vibration system is also present in this model, enhancing comfort during operation. Furthermore, the PP4218AV includes an Easy Start technology that reduces resistance and makes starting the engine effortless, even after long periods of inactivity.

The Poulan PP4218AVL takes things a step further with its enhanced features and capabilities. This model combines the power of a 42cc engine with advanced air filtration, ensuring maximum engine life and optimal performance in dusty environments. The 18-inch Oregon bar and chain guarantee smooth and efficient cuts, while the automatic oiler system keeps the chain adequately lubricated, reducing wear and enhancing durability. The lightweight design and improved anti-vibration system ensure that users can handle this chainsaw for extended periods without discomfort.

In summary, the Poulan PP3816AV, PP4218AV, and PP4218AVL chainsaws embody a blend of power, efficiency, and user-friendliness. With their respective engine sizes and bar lengths, they cater to a range of cutting requirements, from light pruning to more heavy-duty tasks. Each model embraces advanced technologies, such as anti-vibration systems and easy start features, making them excellent choices for both landscaping enthusiasts and professionals alike. With Poulan’s commitment to quality and innovation, users can depend on these chainsaws to get the job done reliably and efficiently.
Top Page Image Contents