Poulan 545186756 Electrical Safety, Use a voltage supply as shown on the nameplate of the unit

Page 3

S Keep the handles dry and clean and free from oil and grease.

S Keep oil cap and fasteners securely tightened.

S Nonconforming replacement compo- nents or the removal of safety devices may cause damage to the unit and pos- sible injury to the operator or bystand- ers. Use only Poulan PRO accessories and replacement parts as recom- mended. Never modify your saw.

SMaintain chain saw with care.

SKeep unit sharp and clean for better and safer performance.

S Follow instructions for lubricating and changing accessories.

S Unplug the chain saw from the power source when not in use, before servic- ing, and when changing accessories and attachments, such as saw chain and guard.

S Check for damaged parts. Before fur- ther use of the chain saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its in- tended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its op- eration. A guard or other part that is damaged should be properly repaired or replaced by an authorized service dealer unless otherwise indicated else- where in the instruction manual.

SWhen not in use, chain saws should be stored in a dry, high or locked-up place

out of the reach of children.

SWhen storing saw, unplug and use a bar sheath or carrying case.

ELECTRICAL SAFETY

WARNING: Avoid a dangerous environment. To reduce the risk of elec- trical shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs, etc. Do not expose to snow, rain, or water to avoid the possibil- ity of electrical shock. Do not handle ex- tension cord or plug with wet hands.

SUse a voltage supply as shown on the nameplate of the unit.

SAvoid dangerous situations. Do not use in the presence of flammable liquids or gases to avoid creating a fire or explo-

sion and/or causing damage to unit.

S To reduce the risk of electrical shock, this appliance has a polarized plug (one blade is wider than the other) and will re- quire the use of a polarized extension cord. The appliance plug will fit into a po- larized extension cord only one way. If

3

the plug does not fit fully into the exten- sion cord, reverse the plug. If the plug still does not fit, obtain a correct polar- ized extension cord. A polarized exten- sion cord will require the use of a polar- ized wall outlet. This plug will fit into the polarized wall outlet only one way. If plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord recep- tacle, or extension cord plug in any way.

S To reduce risk of electrical shock, use extension cords specifically marked as suitable for outdoor appliances. The electrical rating of the cord must not be less than the rating of unit. The cord must be marked with suffix “W--A” (in Canada, “W”). Use a polarized cord. Make sure your extension cord is in good condition. Inspect extension cord before use and replace if damaged. Do not use a damaged cord. Cord insula- tion must be intact with no cracks or de- terioration. Plug connectors must be undamaged. An undersized extension cord will cause a drop in line voltage re- sulting in loss of power and overheating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavi- er the cord (see SELECT AN EXTENSION CORD in the OPERATION section). Do not use multiple cords.

SDo not abuse cord. Never carry the unit by the extension cord or yank extension cord to disconnect unit.

SSecure extension cord to power cord to prevent disconnection from unit.

SDo not use the unit if the switch does not turn the unit on and off properly, or if the lockout does not work. Repairs to the switch must be made by an authorized

service dealer.

S Keep extension cord clear of operator and obstacles at all times. Position cord so that it will not be caught on branches. Do not expose cords to heat, oil, water, or sharp edges.

STo avoid the possibility of electric shock, avoid body contact with any grounded

conductor, such as metal fences or pipes.

S Ground Fault Circuit Interrupter (GFCI) protection should be provided on circuit or outlet to be used. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. Inspect chain saw cords periodi- cally and if damaged, have repaired by an authorized service dealer.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents English EspañolFrançais Safety Rules Operate Your SAW SafelyPlan Ahead Conductor, such as metal fences or pipes Electrical SafetySion and/or causing damage to unit Use a voltage supply as shown on the nameplate of the unitGuard Against Kickback Reduce the Chance KickbackMaintain Control Chain Brake and CKA Angle Kickback Safety FeaturesDouble Insulation Construction Either of these reactions may cause youOperation AssemblyStarting Your SAW Before Starting SAW Guide BAR and Chain OILChain Brake Stopping Your SAWFelling Large Trees 6 inches in diameter or larger Cutting MethodsOperating Tips Tree Felling TechniquesBucking Techniques Hinge holds tree on stump and helps control fallCutting a Fallen Tree Bucking Important PointsThrough the limb Bucking Using a LOG or Support StandLimbing PruningMaintenance Service and Adjustments Chain Adjustment Customer Serviceable PartsTo Replace Chain Steps after each use Troubleshooting Table Cause RemedyStorage Seasonal StorageWarranty Statement Poulan PROTerry Fox Way Mississauga, Ontario L5V3E4

545186756 specifications

The Poulan 545186756 is a versatile chainsaw designed for both amateur woodworkers and seasoned professionals. Renowned for its reliability and robust performance, this chainsaw is crafted to handle a variety of cutting tasks ranging from trimming branches to felling small trees.

One of the standout features of the Poulan 545186756 is its powerful engine. Equipped with a 50cc, 2-stroke engine, this chainsaw delivers impressive cutting power. The engine is designed to provide optimal torque while maintaining fuel efficiency, which means users can work longer without frequent refueling. This perfect balance of power and efficiency makes it an ideal choice for homeowners and landscapers alike.

Furthermore, the Poulan 545186756 incorporates advanced technologies that enhance its usability. The chainsaw features an automatic oiling system, which ensures smooth chain operation and prolongs the life of the cutting equipment. This system automatically delivers oil to the chain as needed, reducing the maintenance required by the user. The tool-free chain tensioning system is another user-friendly feature, allowing for quick adjustments without the need for additional tools, enabling users to get back to work in minutes.

When it comes to safety, the Poulan 545186756 has multiple protective features. This includes a chain brake that quickly halts chain movement in the event of kickback, ensuring user safety during operation. The ergonomically designed handle provides a comfortable grip and minimizes vibrations, which can reduce operator fatigue during long cutting sessions.

The 18-inch bar length strikes a perfect balance between maneuverability and cutting capacity, allowing users to tackle various sizes of wood with precision. This chainsaw also features heavy-duty construction, making it durable enough to withstand the rigors of regular use.

In summary, the Poulan 545186756 is a powerful and reliable chainsaw equipped with advanced features that cater to both novice and experienced users. Its efficient engine, user-friendly technologies, and safety features make it a top choice for anyone looking to take on outdoor projects with confidence and ease.
Top Page Image Contents