“HARD TOP” GRASS CATCHER
ASSEMBLE FRAME AND BAG
•Thread upper tubular frame into hem of bag as shown. Be sure angled ends of frame point downwards.
•Slip lower frame into tubular upper frame as shown.
•Slip vinyl bindings over frame.
•Install two (2) blunt pointed screws in front holes and tighten securely.
Sharp pointed screws | Catcher top |
(Rear and side holes) |
|
PULL |
|
CATCH | ER |
BAG FOR | |
REMO WARD TO | |
VE |
|
SLACK | |
| Blunt pointed screws |
Catcher bag and frame | (Front holes) |
Hem
Start here
Upper tubular frame
TO ATTACH HARD TOP CATCHER
•Open the rear door on mower housing.
•Place frame side hooks into slots in handle brackets.
•Release rear door, allowing it to nest into top of catcher.
Upper tubular | Rear door | Handle bracket |
frame | ||
|
| slots |
Vinyl bindings | Grass catcher |
| |
Lower frame | frame hook |
ASSEMBLE TOP TO FRAME AND BAG NOTE: For ease of assembly, place catcher top upside down on work surface.
•Nest bag and frame assembly into catcher top.
•Install two (2) sharp pointed screws into rear holes first and tighten securely.
•Pull catcher bag forward on frame to remove slack.
•Install two (2) remaining sharp pointed screws in side holes and tighten se- curely.
•Align lower frame and catcher top front holes.
CAUTION: Under normal usage, the catcher material is subject to deterioration and wear and should, therefore, be checked frequently for replacement. Any replacement catcher should be checked to ensure compliance with original manufac- turer's specifications.
CAUTION: Do not run lawn mower without the discharge guard (rear door), approved grass catcher, clipping deflector or mulcher plate in place. Never attempt to operate mower with the discharge guard (rear door) removed or propped open.
7