Poulan 172777 manual Assemble Upstop Bracket, Assemble Wheels, See Illustration Above

Page 10

MODELS WITH FOLDING UPPER HANDLE

•

Position upper handle over lower handle

 

with small hole for mounting upstop

 

bracket to left hand side.

•

Assemble handle bolts and wing nuts.

(SIDE DISCHARGE MOWER SHOWN)

1-1/4" diameter Washer (Rear wheels only)

Mower housing

Tighten securely.

Upstop bracket

Upstop

bracket screw #10-24 x 1/2

Wing nuts

Shoulder bolt

Spacer

3/8-16 Wheel Locknut

Handle bolts

ASSEMBLE UPSTOP BRACKET

(SEE ILLUSTRATION ABOVE)

•Position upstop bracket over hole inside the left side of upper handle and install upstop bracket screw

#10-24 x 1/2. Tighten securely.

ASSEMBLE WHEELS

(USE HARDWARE GROUP “C”)

NOTE: Some model mowers do not have baffles on underside of mower housing. On models without baffle in front and/or rear of housing, use the 1-1/4" washers supplied when you assemble the wheels.

MODELS WITH BOLT-ON WHEELS Cutting height is determined by assem- bling wheels in one of four possible posi- tions on the mower housing. All wheels must be in the same height position for even cutting.

•For each wheel, assemble shoulder bolt, wheel and spacer as shown.

•Assemble 1-1/4" diam. washer (if sup- plied) and 3/8-16 locknut on inside of mower housing and tighten securely.

MODELS WITH "QUICK ADJUST" WHEEL HEIGHT ADJUSTERS Look carefully at the four (4) adjuster assemblies. Notice that there are two (2) each of two (2) different types.

Type I is for the Right Rear and Left Front installation.

Type II is for the Right Front and Left Rear installation.

TYPE I

TYPE II

ASSEMBLE ADJUSTERS TO MOWER DECK

•Position appropriate adjuster at each corner of mower.

•Install each adjuster with adjuster bolt and tab in deck holes as shown and secure with 1-1/4" diam. washer (if sup- plied) and 3/8-16 locknut. Tighten all adjusters securely.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Economy Push Rotary Lawn Mower Table of Contents Safety RulesIII. Children IV. ServiceII. Slope Operation Do notTecumsehhonda To Remove Mower from CartonParts Packed Separately in Carton Parts BAG Contents Group C Group F Assemble Upper Handle AssemblyAssemble Lower Handle USE Hardware Group aAssemble Wheels Type Assemble Adjusters to Mower DeckAssemble Upstop Bracket See Illustration AboveType Install Discharge GuardAssemble Wheels to Adjuster Axle Arms Side Discharge Models only USE Hardware Group DUSE Hardware Group E Install Control BARModels with Spring Loaded Discharge Guard No Hardware RequiredQuantum Engines Spark Plug to Rear of Mower Models with Briggs & Stratton Quantum EnginesAssemble Engine Zone Control Cable to Engine Quantum Engines Spark Plug to Front of MowerModels with Briggs & Stratton Quantum Engines Assemble Cables to Upper HandleModels with Tecumseh Engine USE Hardware Group FAssemble Grass Catcher Spark Plug Boot if EquippedAssemble Starter Rope Guide USE Hardware Group GEngine Speed Control HOW to USE Your Lawn MowerOperation Models with Engine Mounted Speed ControlOperator Presence Engine Control BAR To Adjust Cutting HeightGrass Catcher Rear Discharge Models only To Start Engine Before Starting EngineMowing Tips Fill Engine with OILGeneral Recommendations MaintenanceLubrication Lubrication Chart Before Each USELawn Mower EngineService and Adjustments CleaningStorage OtherProblem Cause Correction Does not startStarter rope

172777 specifications

The Poulan 172777 is a powerful and versatile engine that caters to a variety of outdoor power equipment needs. Known for its reliability and efficiency, it is used in lawn mowers, snow blowers, and other gardening tools, making it a staple for homeowners and landscaping professionals alike.

One of the main features of the Poulan 172777 is its robust engine design. The engine typically features a displacement of 177cc, providing ample power to tackle tough mowing and clearing tasks. Its four-stroke technology ensures smooth performance, delivering a balance of power and fuel efficiency. Users can expect a clean and consistent operation, which is enhanced by the engine's ability to maintain an optimal RPM even under load.

In terms of technology, the Poulan 172777 is equipped with a modern carburetor system that improves fuel delivery and combustion efficiency. This results in reduced emissions and minimizes environmental impact, appealing to eco-conscious consumers. Additionally, the engine is designed with a recoil start system, ensuring that starting the engine is straightforward and hassle-free, allowing users to get to work quickly.

Durability is another significant characteristic of the Poulan 172777. This engine is built with high-quality materials that can withstand harsh outdoor conditions. Its cast iron cylinder sleeve offers increased longevity and helps maintain optimal engine temperatures. The overhead valve (OHV) design contributes to better heat dissipation, further enhancing the engine's lifespan and performance.

Moreover, the Poulan 172777 incorporates features aimed at user comfort and safety. The ergonomic design of the equipment it powers typically includes vibration-dampening technology, which reduces fatigue during extended use. Safety features such as low-oil shutdown mechanisms prevent engine damage and extend the overall life of the equipment.

In summary, the Poulan 172777 stands out for its powerful performance, advanced technology, and durable construction. It is an ideal choice for anyone looking for a reliable engine for their outdoor power equipment, capable of handling a range of tasks with ease. Whether for personal use or professional landscaping, the Poulan 172777 is engineered to deliver efficiency, comfort, and reliability. As such, it remains a popular choice among consumers seeking high-quality outdoor power solutions.
Top Page Image Contents