Poulan 172777 Assemble Cables to Upper Handle, Models with Tecumseh Engine, USE Hardware Group F

Page 14

MODELS WITH SPARK PLUG TO REAR OF MOWER

To prevent cable damage, the cable must be attached to the side of engine, away from the muffler.

•Above the muffler, locate the hole in en- gine shroud. Install supplied cable clip on cable and assemble to side of engine with supplied hex head screw. Tighten securely.

MODELS WITH TECUMSEH ENGINE

•Straighten cable and find the end with the small tapered plastic fitting.

•Hook the “Z” bend fitting on inner wire of cable into hole as shown.

•Align the tapered end of the plastic fitting with the hole in the mounting bracket and push in until fitting snaps into place.

•Route cable under crossbar portion of lower handle and up to upper handle control bar.

•Hook “Z” bend fitting on inner wire into hole in control bar (See “ASSEMBLE CABLES TO UPPER HANDLE” in this manual).

TECUMSEH ENGINES

WITH SPARK PLUG FORWARD

Mounting bracket

Small plastic fitting

“Z” Fitting

TECUMSEH ENGINES

WITH SPARK PLUG REARWARD

“Z” Fitting Small plastic

Mountingfitting bracket

MODELS WITH BRIGGS & STRATTON QUANTUM ENGINES

•Hook the “Z” bend fitting on inner wire of cable (end with tapered plastic fitting) into hole in brake lever of engine. Cor- rect brake lever to use is determined by position of spark plug on your mower

- forward or rearward.

•Position the tapered plastic fitting into the mounting bracket on engine. Snap fitting into place.

•Route cable under crossbar portion of lower handle and up to upper handle control bar.

•Hook “Z” bend fitting on inner wire into hole in control bar (See “ASSEMBLE CABLES TO UPPER HANDLE”).

Brake lever (rearward spark plug)

Brake lever

 

(forward spark

 

plug)

Mounting bracket

Mounting bracket

(rearward spark plug)

(forward spark plug)

ASSEMBLE CABLE(S) TO UPPER HANDLE

(USE HARDWARE GROUP “F”)

•Assemble cable(s) to opposite side of upstop bracket.

•Be sure to route cable(s) underneath crossbar of lower handle.

•Position throttle control (if equipped) on outside of handle and zone control square fitting on the inside.

•Secure to handle with the 1/4-20 ma- chine screw or hex bolt supplied and locknut as shown. Tighten securely.

•Secure cable(s) to crossbar and lower handle with cable ties as needed.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Economy Push Rotary Lawn Mower Table of Contents Safety RulesIII. Children IV. ServiceII. Slope Operation Do notTecumsehhonda To Remove Mower from CartonParts Packed Separately in Carton Parts BAG Contents Group C Group F Assemble Upper Handle AssemblyAssemble Lower Handle USE Hardware Group aAssemble Wheels Type Assemble Adjusters to Mower DeckAssemble Upstop Bracket See Illustration AboveType Install Discharge GuardAssemble Wheels to Adjuster Axle Arms Side Discharge Models only USE Hardware Group DUSE Hardware Group E Install Control BARModels with Spring Loaded Discharge Guard No Hardware RequiredQuantum Engines Spark Plug to Rear of Mower Models with Briggs & Stratton Quantum EnginesAssemble Engine Zone Control Cable to Engine Quantum Engines Spark Plug to Front of MowerModels with Briggs & Stratton Quantum Engines Assemble Cables to Upper HandleModels with Tecumseh Engine USE Hardware Group FAssemble Grass Catcher Spark Plug Boot if EquippedAssemble Starter Rope Guide USE Hardware Group GEngine Speed Control HOW to USE Your Lawn MowerOperation Models with Engine Mounted Speed ControlGrass Catcher Rear Discharge Models only To Adjust Cutting HeightOperator Presence Engine Control BAR To Start Engine Before Starting EngineMowing Tips Fill Engine with OILGeneral Recommendations MaintenanceLubrication Lubrication Chart Before Each USELawn Mower EngineService and Adjustments CleaningStorage OtherProblem Cause Correction Does not startStarter rope

172777 specifications

The Poulan 172777 is a powerful and versatile engine that caters to a variety of outdoor power equipment needs. Known for its reliability and efficiency, it is used in lawn mowers, snow blowers, and other gardening tools, making it a staple for homeowners and landscaping professionals alike.

One of the main features of the Poulan 172777 is its robust engine design. The engine typically features a displacement of 177cc, providing ample power to tackle tough mowing and clearing tasks. Its four-stroke technology ensures smooth performance, delivering a balance of power and fuel efficiency. Users can expect a clean and consistent operation, which is enhanced by the engine's ability to maintain an optimal RPM even under load.

In terms of technology, the Poulan 172777 is equipped with a modern carburetor system that improves fuel delivery and combustion efficiency. This results in reduced emissions and minimizes environmental impact, appealing to eco-conscious consumers. Additionally, the engine is designed with a recoil start system, ensuring that starting the engine is straightforward and hassle-free, allowing users to get to work quickly.

Durability is another significant characteristic of the Poulan 172777. This engine is built with high-quality materials that can withstand harsh outdoor conditions. Its cast iron cylinder sleeve offers increased longevity and helps maintain optimal engine temperatures. The overhead valve (OHV) design contributes to better heat dissipation, further enhancing the engine's lifespan and performance.

Moreover, the Poulan 172777 incorporates features aimed at user comfort and safety. The ergonomic design of the equipment it powers typically includes vibration-dampening technology, which reduces fatigue during extended use. Safety features such as low-oil shutdown mechanisms prevent engine damage and extend the overall life of the equipment.

In summary, the Poulan 172777 stands out for its powerful performance, advanced technology, and durable construction. It is an ideal choice for anyone looking for a reliable engine for their outdoor power equipment, capable of handling a range of tasks with ease. Whether for personal use or professional landscaping, the Poulan 172777 is engineered to deliver efficiency, comfort, and reliability. As such, it remains a popular choice among consumers seeking high-quality outdoor power solutions.
Top Page Image Contents